SteelThumb

Procedure · OKF v0.2

Plant nagaimo above prepared pipe receivers

Place identified nagaimo planting stock in a mapped buried-pipe bed and arrange emergence support.

Status: draft 3 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Plant nagaimo above prepared pipe receivers

Prerequisites

Use the prepared pipe bed, its retained marker positions and matching stock/equipment instructions. Check the crop identity and restrictions. This task assumes planting material with an identifiable growing point; it does not establish a pre-sprouting method or transfer the ordinary-ground cut-piece recipe into pipe culture.

Before planting, confirm local seasonal suitability, seed-stock preparation, irrigation and a soil/product-specific fertility plan. These care inputs remain unresolved by the adopted route. Have planting tools, prepared stock, supports and netting available. A completed planting task is not a complete growing protocol.

Placement and emergence

Align each seed tuber’s growing point with the vertical marker over the receiver.1

Cover the positioned seed tuber with 5 cm of soil.1

Install supports and netting when shoots emerge above ground.1

Editorial check: verify each marker against the receiver map before placing stock. If the map and marker disagree, uncover and relocate the receiver rather than guessing where its center lies. Record the growing-point alignment and cover before closing the planting position. Track emergence separately for each position; do not assume lack of visible growth proves rot or justify repeatedly digging up stock.

Follow-up

Retain a dated record of planting and emergence. Obtain compatible local watering and feeding instructions before proceeding with the crop. A fertilizer analysis alone does not establish the dose for a particular product or soil, and the source's follow-up dose lacks an explicit application basis. No automatic conversion to grams per plant is made here.

The pipe-method guide retains fill differences and species boundaries. Follow the pipe harvest task for eventual equipment removal, rather than using the ordinary-ground excavation offset as a pipe-opening instruction.

Connected concepts (4)

Chinese yam — nagaimo

Dioscorea polystachya with an initial Japanese long-form nagaimo ground route and regional restrictions.

applies to · Crop

Prepare a buried nagaimo pipe bed

Plus Y’s nagaimo-specific Clever Pipe preparation branch; Japanese buried garden-soil system, not a freestanding pot or jinenjo recipe.

Referenced by Procedure
Inspect OKF v0.2 Claims & Evidence (3 claims, 1 sources)
#align recommendation

Align each seed tuber’s growing point with the vertical marker over the receiver.

Applicability: Plus Y’s nagaimo-specific Clever Pipe branch, inspected 2026-09-28; locally permitted Japanese ground cultivation with matching equipment.

Evidence: supports via plusys-pipe (長芋の栽培方法, STEP2 step 1 and POINT)

#cover recommendation soil cover: 5 cm (Soil cover over positioned planting material; distinct from pipe burial depth.)

Cover the positioned seed tuber with 5 cm of soil.

Applicability: Plus Y’s nagaimo-specific Clever Pipe branch, inspected 2026-09-28; locally permitted Japanese ground cultivation with matching equipment.

Evidence: supports via plusys-pipe (長芋の栽培方法, STEP2 step 2 覆土)

#support recommendation

Install supports and netting when shoots emerge above ground.

Applicability: Plus Y’s nagaimo-specific Clever Pipe branch, inspected 2026-09-28; locally permitted Japanese ground cultivation with matching equipment.

Evidence: supports via plusys-pipe (長芋の栽培方法, STEP4)