SteelThumb

Procedure · OKF v0.2

Harvest nagaimo from buried pipes

Recognize the supplier’s harvest stage and remove tubers from the buried equipment.

Status: draft 2 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Harvest nagaimo from buried pipes

Scope and preparation

For identified nagaimo in the matching prepared pipe bed. Retain its location map, stock identity and date of full vine dieback. Have digging tools and a stable surface for the opened pipe. Check the crop’s regional restrictions and spread pathways before moving material.

Wait at least 10 days after vines have completely died before harvesting.1

Carefully excavate the pipe, open it, and remove the tuber.1

Inspect and follow up

Editorial handling sequence: locate the pipe from the retained map, expose it sufficiently to release it from surrounding soil, and follow the actual model’s opening instructions. Avoid treating an unfamiliar closure as interchangeable with another pipe design. Once exposed, record whether the tuber entered the receiver, where it formed, and any damage visible before versus after removal.

Distinguish a tuber that missed the receiver from one that entered but became misshapen, and from a straight tuber broken while lifting. Compare each observation with the planting alignment and equipment record. The reported grower failure does not establish the cause of this harvest’s shape.

Keep loose propagules accounted for and obtain locally applicable disposal guidance. This task supplies no storage duration, food-safety assessment or assurance that ground overwintering is suitable in another climate. Premature vine death from injury or disease should not be assumed equivalent to ordinary seasonal maturity; obtain local diagnosis if decline was unexpected.

Source review · Planting task.

Connected concepts (4)

Chinese yam — nagaimo

Dioscorea polystachya with an initial Japanese long-form nagaimo ground route and regional restrictions.

applies to · Crop

Prepare a buried nagaimo pipe bed

Plus Y’s nagaimo-specific Clever Pipe preparation branch; Japanese buried garden-soil system, not a freestanding pot or jinenjo recipe.

Referenced by Procedure
Inspect OKF v0.2 Claims & Evidence (2 claims, 1 sources)
#ready recommendation minimum post dieback wait: 10 day (After complete vine dieback in supplier nagaimo route; not days after planting or a universal climate rule.)

Wait at least 10 days after vines have completely died before harvesting.

Applicability: Plus Y’s nagaimo-specific Clever Pipe branch, inspected 2026-09-28; locally permitted Japanese ground cultivation with matching equipment.

Evidence: supports via plusys-pipe (長芋の栽培方法, STEP5)

#lift-open recommendation

Carefully excavate the pipe, open it, and remove the tuber.

Applicability: Plus Y’s nagaimo-specific Clever Pipe branch, inspected 2026-09-28; locally permitted Japanese ground cultivation with matching equipment.

Evidence: supports via plusys-pipe (長芋の栽培方法, STEP5)