Aerated deep-water culture
Aerated deep-water culture uses a nutrient reservoir, a floating plant support, an air pump with airstone, and a light source.1
For the home system, Cornell gives about one gallon of nutrient solution per plant as a starting reservoir allowance; larger volumes buffer changes better.1
Choose a clean food-safe reservoir made of material that does not leach harmful chemicals into the water.2
Use an opaque reservoir and fit the floating cover to limit light reaching the solution; leave enough clearance for it to descend without wedging in a tapered container.1
For one-inch rockwool cubes, Cornell suggests testing a hole between ⅞ and 1 inch across so the wet cube is supported securely.1
Place the airstone in the nutrient reservoir and run its air pump continuously; check the stone and tubing for clogs each week.1
Cornell’s home leafy-green guide uses a daily light integral of 12–17 mol/m²/day; choose lamp height and run time from light reaching the plant canopy.1
Assemble the supported arrangement
Use a stable reservoir, a fitted floating support compatible with the chosen food-growing setup, fresh seed cubes, an air pump/tubing/airstone, and an adjustable lamp with a timer. Confirm electrical installation and pump backflow protection against the actual equipment instructions before filling. Cornell’s construction examples use insulation board; they are not a certification of every foam product for prolonged food-growing contact. Obtain suitable material information from the supplier.
Choose enough surface area for the mature cultivar’s spacing, not just enough liquid volume. The lettuce route owns crop selection, seed starting, nutrient mixing, monitoring and harvest. The approximate per-plant water allowance is a home design starting point; this system is topped up as needed and is not a sealed one-fill crop.
For constant artificial light intensity, the source’s calculation is DLI = canopy PPFD × hours lit × 3600 / 1,000,000, using PPFD in µmol/m²/s. Measure across the planted area or obtain the fixture’s canopy-level distribution at the actual mounting height. A total PPF rating in µmol/s cannot substitute for that measurement. Sunlight, if present, contributes to the total; a fixed timer alone does not prove the DLI target is met.1
Distinct methods and failure checks
A floating support tracks a falling water surface. A rigid lid does not; Cornell explicitly warns that fixed-lid roots can lose contact with solution. Fixed-lid systems therefore need their own level checks and fit decisions. This collection uses the floating-support branch.1
Check for a jammed float, dry seed cubes and an interrupted bubble stream. Restore the intended support movement and aeration before attributing a wilted plant to fertilizer. Equipment sizing and dissolved-oxygen performance are not established merely by seeing bubbles; confirm pump suitability for the chosen water depth and volume with its specifications. Record any outage and subsequent root/new-leaf condition. Persistent decline needs the crop investigation route.
This is not an NFT, aeroponic or aquaponic design. Passive noncirculating root-air-space rules are different; see the source comparison. No global energy-cost or year-round climate feasibility claim is made.