SteelThumb

Procedure · OKF v0.2

Collect a naranjilla field-soil sample

A source-specific composite sampling task to support laboratory interpretation before nutrient planning.

Status: draft 5 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Collect a naranjilla field-soil sample

Use for a soil-grown naranjilla / lulo field or garden area when its receiving laboratory accepts this method. The task ends with a labeled, representative sample and site record, not a fertilizer prescription. It is not a hydroponic solution, potting-medium or leaf-tissue sampling method.

Before collecting, contact the laboratory for its current sampling depth, sample quantity, packaging, drying/shipping and requested analyses. If these differ from the INIAP method below, use the laboratory's complete method and record the difference; do not combine methods without telling the interpreter. Have clean sampling tools, a clean dry bucket, accepted sample containers, labels and a site sketch ready. These preparation and recordkeeping steps are editorial implementation.

Separate and sample the lots

INIAP divides nonuniform ground into separate sampling lots, including differences such as flat and sloping areas.1

Within each lot, INIAP collects 20 subsamples along a zigzag covering the area.1

The spade method samples soil to 20 cm depth.1

Sketch the lots and give each a distinct identifier. Keep each lot's soil separate throughout collection. Follow the zigzag through the lot rather than collecting only near an entrance or a single vigorous plant. Remove surface vegetation at each point, open a V-shaped hole to the stated depth and take a soil slice from a side, retaining a consistent slice through that depth. The source also permits a soil auger reaching the required depth. Do not quietly mix depths or add a visibly different area to complete the count.

Combine and label

INIAP combines the subsamples in a clean, dry bucket and mixes them thoroughly.1

INIAP takes 1 kg of the mixed soil for the laboratory sample.1

Mix one lot at a time, then place its representative portion in the laboratory's accepted container. The historical INIAP instruction uses a plastic bag; packaging and handling for a different laboratory remain its decision. Keep the lot identifier on both the sample and record.

The source asks for sampling date, site identification/location and elevation, sample identifier, area, previous and present crop, fertilizer history and topography. Supply the locally relevant submission fields and retain a private copy; personal contact/location records belong in the grower's records, not the reusable almanac.

Check and follow through

Before dispatch, match each label to its lot and record; check collection depth, subsample count, sample mass and handling against the agreed method. If lots were mixed or a label is uncertain, recollect rather than interpreting an ambiguous composite. Record deviations and ask the laboratory whether they compromise interpretation.

When results arrive, retain the test method, units and sampling date. Ask for crop- and site-appropriate interpretation that distinguishes nutrient amounts from fertilizer product amounts. The nutrition decision guide explains why the historical table is not a universal dose. Sampling establishes neither a diagnosis nor a measured garden outcome here. Source audit.

Connected concepts (3)

Naranjilla / lulo

Shared Solanum quitoense fruit profile with linked nursery, field planting, care and harvest tasks, scoped sources and unresolved regional/system needs.

applies to · Crop
Inspect OKF v0.2 Claims & Evidence (5 claims, 1 sources)
#zones recommendation

INIAP divides nonuniform ground into separate sampling lots, including differences such as flat and sloping areas.

Applicability: INIAP 2010 Ecuadorian soil-grown naranjilla guidance; receiving laboratory and local interpretation must suit the site and sampling method.

Evidence: supports via iniap-nutrition (Toma de muestras de suelo para su análisis, printed p. 58 / PDF p. 18)

#subsamples recommendation soil subsamples per lot: 20 count (Source field-lot composite method; not automatically a small-container sampling rule.)

Within each lot, INIAP collects 20 subsamples along a zigzag covering the area.

Applicability: INIAP 2010 Ecuadorian soil-grown naranjilla guidance; receiving laboratory and local interpretation must suit the site and sampling method.

Evidence: supports via iniap-nutrition (Toma de muestras de suelo para su análisis, printed p. 58 / PDF p. 18)

#depth recommendation soil sampling depth: 20 cm (Source V-hole spade method, field soil; keep consistent across a composite.)

The spade method samples soil to 20 cm depth.

Applicability: INIAP 2010 Ecuadorian soil-grown naranjilla guidance; receiving laboratory and local interpretation must suit the site and sampling method.

Evidence: supports via iniap-nutrition (Toma de muestras de suelo para su análisis, printed p. 59 / PDF p. 19)

#mix recommendation

INIAP combines the subsamples in a clean, dry bucket and mixes them thoroughly.

Applicability: INIAP 2010 Ecuadorian soil-grown naranjilla guidance; receiving laboratory and local interpretation must suit the site and sampling method.

Evidence: supports via iniap-nutrition (Toma de muestras de suelo para su análisis, printed p. 59 / PDF p. 19)

#mass recommendation composite soil sample mass: 1 kg (INIAP laboratory submission described in 2010; confirm receiving laboratory requirements.)

INIAP takes 1 kg of the mixed soil for the laboratory sample.

Applicability: INIAP 2010 Ecuadorian soil-grown naranjilla guidance; receiving laboratory and local interpretation must suit the site and sampling method.

Evidence: supports via iniap-nutrition (Toma de muestras de suelo para su análisis, printed p. 59 / PDF p. 19)