SteelThumb

Procedure · OKF v0.2

Condition stored Japanese pear pollen in a cooler

Saga humid-conditioning setup with explicit viability and temperature limitations.

Status: draft 5 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Condition stored Japanese pear pollen in a cooler

Prerequisites

This task covers stored pollen for identified Asian/Japanese pear.

Confirm donor and recipient compatibility and label the stored batch, cultivar and storage history. Obtain supplier guidance on whether this method fits the supplied pollen. Have newspaper, a cooler, a cold pack, a towel, a small plate and a timer. Plan the subsequent germination assessment or dry application before starting; conditioning is not proof of viability.

The source provides a physical setup and a duration range, but not a numerical chamber temperature, humidity target or rule for choosing a particular endpoint within that range. If the supplier's specified preparation differs, resolve that difference before treating the batch. Do not splice NARO's separate room-temperature or controlled-humidity schedules into this method.

Set up and time the treatment

Divide pollen removed from cold storage into small portions in newspaper.1

Put a cold pack wrapped in a wetted, wrung-out towel inside a cooler.1

Place the portioned pollen on a small plate inside the cooler.1

Allow pear pollen to take up moisture in the cooler for 6–24 hours.1

Excessively long conditioning can reduce germination.1

Editorial handling check: keep the labeled pollen on its paper/plate arrangement, separate from liquid water. This is moisture uptake from the chamber, not a pollen-water slurry. Record start time and planned removal time, then remove the batch at the selected endpoint within the source range. Record actual duration and any visible wetting or clumping rather than assuming treatment succeeded.

Assess and hand off

Keep conditioning history with any germination result. The application task's viability requirement still applies. Use a supplier or competent service for a suitable germination assessment; A separate Tottori assay reference now documents incubation and counting; medium preparation and comparability still need laboratory/supplier resolution. An untested conditioned batch is not automatically suitable for dilution or application.

If results are poor, review storage history, treatment duration, donor identity and test conditions before deciding whether to replace pollen. Do not repeatedly extend treatment to rescue a low result. Extender mixing, collection and long-term storage remain separate tasks.

Inspected source and photographs. No field outcome, recovery percentage or guaranteed fruit set claimed.

Connected concepts (4)

Asian pear

A scoped home-orchard entry for identified Asian pear stock, with thinning and tree-ripe harvest tasks.

Referenced by Crop
Inspect OKF v0.2 Claims & Evidence (5 claims, 1 sources)
#portion recommendation

Divide pollen removed from cold storage into small portions in newspaper.

Applicability: Saga cooler-conditioning method for refrigerated/frozen Japanese pear pollen before testing or dry application; not long-term storage or liquid formulation.

Evidence: supports via saga-pollination (PDF page 3 — 順化処理 step 1; photograph 5)

#cooler recommendation

Put a cold pack wrapped in a wetted, wrung-out towel inside a cooler.

Applicability: Saga cooler-conditioning method for refrigerated/frozen Japanese pear pollen before testing or dry application; not long-term storage or liquid formulation.

Evidence: supports via saga-pollination (PDF page 3 — 順化処理 step 2; photograph 6)

#plate recommendation

Place the portioned pollen on a small plate inside the cooler.

Applicability: Saga cooler-conditioning method for refrigerated/frozen Japanese pear pollen before testing or dry application; not long-term storage or liquid formulation.

Evidence: supports via saga-pollination (PDF page 3 — 順化処理 step 3; photograph 7)

#duration recommendation pollen conditioning duration: 6–24 hour (Saga cooler method for pear; not plum timing or pollen storage life)

Allow pear pollen to take up moisture in the cooler for 6–24 hours.

Applicability: Saga cooler-conditioning method for refrigerated/frozen Japanese pear pollen before testing or dry application; not long-term storage or liquid formulation.

Evidence: supports via saga-pollination (PDF page 3 — 順化処理 step 4)

#overrun descriptive

Excessively long conditioning can reduce germination.

Applicability: Saga cooler-conditioning method for refrigerated/frozen Japanese pear pollen before testing or dry application; not long-term storage or liquid formulation.

Evidence: supports via saga-pollination (PDF page 3 — sentence after step 4)