Assess an aeroponic root chamber before planting
Use this with the system description and a selected crop protocol. The output is a documented readiness decision, not a seed-to-harvest recipe or proof of crop performance. CIP's seed-potato equipment checks inform this assessment; using them for lettuce is an editorial transfer of mechanical checks, not a validated lettuce protocol.
Have the actual chamber and delivery design, equipment instructions, crop identity/stage, water analysis, nutrient formulation, measurement instructions, cleaning plan and backup plan available. Review the lettuce evidence before treating a published timer or EC as a transferable recipe.
1. Confirm the operating specification
Record the crop and harvest purpose, starting material, root support, crop spacing, light and separate air/root-zone temperature requirements. Identify the entire nutrient recipe, stock strength and final solution volume; retain water chemistry and the intended pH/EC measurement method. A nominal EC cannot identify a fertilizer formulation. Missing crop or recipe inputs require resolution before stocking the system.
Record pump, nozzle, filter, operating pressure/flow, on-time, start-to-start interval or explicit off-time, reservoir and drain arrangement. Distinguish an interval from an off-period. List any retained water layer. Nozzle droplet specification and actual coverage cannot be inferred from a marketing name.
2. Check delivery and return before planting
After transplanting, CIP checks that roots receive nutrient spray and that plant openings do not admit light into its boxes.1
CIP advises testing available nebulizer types before selecting the units for an installation.1
Editorial commissioning sequence: run the empty system according to its equipment instructions; observe every planting position, return flow, connections and tank level over complete programmed cycles. Confirm how nozzle access and cleaning will work after roots grow. Repeat the coverage check when the actual seedlings are installed; a free-running nozzle can be obstructed by a root mass. Do not place plants in a system with unexplained dry positions, leaks or flooding.
3. Confirm failure response
CIP calls for standby power and a spare pump, with an effective response when the operating supply fails.1
Document who can respond, the replacement/backup equipment and the supplier's restart procedure. Before adding plants, exercise the intended backup under an equipment-appropriate test and confirm that delivery resumes at all positions. This is an editorial readiness test; it supplies no universal safe outage duration. CIP's seed-potato examples are not evidence that lettuce can wait a stated number of minutes without mist.
4. Establish observation and troubleshooting
When most plants wilt, CIP’s troubleshooting checks inadequate pressure and clogged pump inlet or filters.1
When only some plants wilt, CIP checks nearby nebulizers for blockage; when spray is adequate, it checks for stem damage.1
An unexpectedly fast-emptying tank calls for checking leaks and a blocked return-drain opening in CIP’s system.1
CIP identifies instrument calibration as a check when pH or EC measurements are inconsistent.1
Record actual solution temperature, pH/EC, tank level, delivery and root/leaf condition at the frequency required by the selected crop/equipment plan. Respond promptly to loss of delivery. The published source checks suggest where to investigate; they do not diagnose every wilted plant. With many affected plants inspect common supply first; with a local cluster inspect its nozzle and support. Isolate equipment as its instructions require before cleaning or replacing parts, restore the intended delivery and compare subsequent plant condition. Persistent wilt despite adequate delivery needs a separate root, nutrient or pathogen assessment.
When water disappears unexpectedly, inspect the entire return path as well as the tank. If instruments disagree, confirm calibration before adjusting nutrient concentration or pH. Do not copy the manual's historical pesticide or acid-dosing directions into another crop's system. Obtain the current crop/product-specific protocol for any such intervention.
Result and follow-up
Record ready for the specified crop protocol, not ready, or unresolved. Ready requires a complete crop/recipe specification, demonstrated delivery and return, usable monitoring/cleaning access and a working failure response. This checklist cannot supply the missing protocol: the currently linked lettuce research examples remain incomplete as home-growing instructions.
Repeat the relevant checks after transplanting, equipment changes, cleaning, outages and root growth that changes coverage. Keep operating observations separate from intended settings and any later crop outcome. Source inspection.