Plan an indoor paddy straw mushroom crop
Use this guide to scope an indoor paddy straw mushroom installation. The prepared-compost treatment and inoculation task now records the same indoor method; initial compost preparation and process controls remain prerequisites.
The bulletin’s indoor method specifies room temperature of 32–34 °C during spawn running.1
For indoor fruiting, the bulletin gives 30 °C, 80% relative humidity, fluorescent light and intermittent fresh air.1
The source uses a composted-substrate indoor method. Do not attach these settings to an arbitrary untreated straw bed and call it the same method. Light intensity/photoperiod, measured air exchange, room loading and the temperature measurement position need specification. Humidity is room-air RH, not substrate water content.
Water and poor development
The indoor method warns that watering compost can cool it and suffocate tiny primordia.1
The FAQ associates competitor problems with inadequate substrate pasteurization, excessive nitrogen additions or excessive watering.2
Editorial investigation: distinguish slow colonization, stalled pinheads and visible competing growth before changing conditions. Review treatment records, actual substrate and room temperatures, water additions, nutrient supplementation and ventilation. These signs alone do not identify a contaminant or establish that a crop is edible. Obtain qualified diagnosis and a crop-specific contamination response before reuse or corrective chemical treatment; no pesticide recipe is supplied.
The FAQ's broad climate paragraph also gives a lower RH range and a separate ideal RH range. Those contexts are not resolved here and are not averaged into a new target. Traditional bundle, circular and composted indoor methods in the bulletin use different preparation and management; keep method identity with measurements.
What must be resolved to start
Obtain one complete, current spawn/substrate treatment method with quantities, treatment endpoints, cooling and inoculation controls. Specify cleaning, water quality, crop inspection and contaminated-material handling. Then define room controls and local energy/season constraints. The harvest task supplies a picking endpoint, not missing cultivation steps. No local crop trial or yield is reported. Source notes.