Sun-dry partially dried shelled maize on a sheet
Purpose and prerequisites
Continue drying a maize lot that has already been partially dried on the cob and shelled. This starting point differs from harvesting fresh ears or putting newly mature wet grain into a container. Use a suitable sheet, rake, protected indoor holding space and access to a crop-calibrated moisture meter with its manual. Keep lot identity.
The source does not give a universal starting moisture, suitable daily weather window, raking frequency or elapsed drying time for this sheet method. Resolve local weather and the intended storage target before relying on it for a crop. If suitable drying conditions or timely protected handling are unavailable, arrange an appropriate local dryer rather than assuming more days outdoors will suffice.
Prepare and operate the drying area
Plan an on-farm drying arrangement that protects maize from rain, termites, rodents and other animals.1
Spread the partially dried, shelled maize on a plastic sheet in a layer no deeper than 5 cm.1
Move the maize from side to side with a rake while it dries.1
At night, protect the grain by folding the sheet; the guide also shows gathering and tying the sheet to carry the grain indoors.1
The overnight arrangement is temporary handling during drying, not a sealed-storage procedure. Editorial check: note rain or rewetting, grain-layer uniformity and differences between sampled areas. Retain those observations when deciding whether the planned method is working.
Measure progress and decide the next step
Use the grain-moisture method, retaining location-specific samples where uneven drying is suspected. Compare results with a documented local storage requirement; do not use elapsed sunshine hours, appearance or this layer-depth limit as proof that drying is complete.
The source gives a general below-13% storage statement elsewhere but does not supply the sampling method, duration/temperature scope or explicit moisture basis needed for a complete storage protocol here. That statement is not substituted for a locally qualified endpoint. Drying decision guide explains why the Minnesota bin endpoint also remains a separate context.
Food-quality acceptance, packaging, monitoring during storage and preparation remain separate tasks. Crop · Shelling and winnowing · Sources.