Process a small black-walnut harvest
Prepare
Start with identified black walnuts from the collection route. Prepare a clean work surface, washing vessel, screened drying space, suitable cracking tool and freezer capacity. Protect eyes and keep hands clear of hammer blows; use tools according to their instructions. This is not a route for moldy or contaminated nuts, nor a microbial decontamination process.
Process
Crack a few nuts to check kernel filling before processing a large batch.1
Remove hulls promptly, using a hammer for small batches; wear rubber gloves against staining.1
Wash hulled nuts thoroughly in a bucket or tub to remove hull residues.1
Air-dry washed in-shell nuts for two to three weeks in a cool, dry, ventilated place.1
On a wire screen, keep drying layers no more than three nuts deep.1
Crack dried shells with a suitable nutcracker and extract kernels with a pick or pliers.1
Bag the extracted kernels and store them in the freezer.1
Review before packaging
Editorial checks: keep lots labeled with cultivar and collection/drying dates. Protect the drying area from animals, dirt and rain. The published interval supplies a planning range, not proof that every climate or batch will reach adequate dryness. If kernels remain damp or conditions were humid, hold the batch and obtain local food-preservation guidance before packaging; do not substitute an English-walnut heated-drying setting. Inspect extracted kernels for shell fragments.
This route omits pre-cracking soaking and chemical washing. No freezer temperature, finite quality life or pathogen-kill step was established by the adopted source. Record the storage date and obtain food-preservation guidance for those decisions; freezing is not a method for repairing a suspect batch. Source scope.