Initiate nameko block fruiting: Kinokkusu method
Prerequisites and boundary
Use identified cultivated nameko blocks appropriate for this supplier method. Confirm strain, bag/cap design, colonization and physiological readiness with the producer before opening. The source does not supply an elapsed incubation time or a readiness test here. A freshly inoculated bag is not automatically a fruiting-ready block.
Have temperature/humidity measurements and a growing space suited to controlled watering, drainage and ventilation. The indoor block system overview distinguishes purchased colonized material from making substrate and spawn. This task does not set a CO₂ concentration, ventilation rate or light dose. Obtain those inputs from the strain/block producer when sizing a controlled room. The source's floor-watering option presupposes a suitable cultivation facility; it is not an instruction to wet a household floor.
Set conditions and start fruiting
Maintain 7–15°C during fruiting management.1
Maintain humidity around 90% during fruiting.1
Lift the cap and separate the bag from the block to admit oxygen.1
Water over the bag each evening; the supplier also describes morning-and-evening watering as effective.1
After confirming pin initiation, remove the upper part of the bag.1
Editorial sequence check: retain the bag during the over-bag watering stage; opening its upper portion depends on observed pins, not a guessed number of days. Have the supplier demonstrate the intended cap-lifting/bag-loosening action for the actual package. Do not substitute an X-cut oyster-kit instruction. Log opening date and observed pin date separately.
Maintain and hand off
Continue watering to prevent the block surface from drying.1
Reduce watering once harvesting begins.1
After heating starts, limit direct watering of blocks and maintain room humidity by measures such as watering the floor.1
Remove blocks showing contaminant growth promptly to limit spread during watering.1
Exact water amount and the meaning of “reduce” remain qualitative. Inspect actual surface condition and record applications; ask the producer to resolve persistent drying, standing water or damaged pins before repeating a fixed schedule. For suspect contamination, separate the affected unit from healthy blocks and obtain supplier assessment; this task does not identify contaminants by color or authorize salvaging food from a compromised block.
This task ends with established fruiting and its care record. Block-specific maturity cues, physical detachment, subsequent flush management and food preparation need separate instructions. The Japanese log harvest guide is not proof that its size criterion applies to these blocks. Record harvested mass only from actual picking; the source's yield figure is not a promised outcome.