Harvest pearl millet and plan grain drying
Before cutting, arrange a clean collection area, head-drying space, access to a suitable grain thresher and its operating instructions, and a grain-handling adviser or service able to measure pearl millet moisture. This route requires threshing equipment; a complete equipment-free household threshing method is not established here.
ICRISAT uses hard grain and a dark hilar mark as maturity cues.1
Cut heads, dry them, mechanically thresh, then winnow and dry the separated grain.1
ICRISAT requires grain moisture below 12% for storage longer than six months.1
UGA specifies drying harvested grain to 10–12% moisture.2
Editorial work sequence: inspect multiple heads for maturity, including later tillers. Hold abnormal heads apart using the care procedure. Cut selected mature heads, label the lot and follow the supported handling sequence. Set and operate the actual thresher according to its manufacturer and inspect the output for unthreshed heads and broken grain before continuing. Record losses, separated grain mass and retained debris independently.
Storage remains conditional
The two endpoints above are source-specific: the Georgia range includes a boundary excluded by ICRISAT's stricter long-storage condition. Do not average them or treat their durations as identical. The sources do not establish a calibrated household moisture-measurement method, sample protocol, drying layer thickness or a universal sealed-bin design. Arrange those decisions with a grain service before storing a food lot; apparent hardness does not substitute for the missing measurement.
This procedure reaches threshed grain. It does not validate long-term home storage, cleaning of contaminated food, milling, malting, dehulling or a kitchen preparation method. Obtain a food-purpose processor's acceptance criteria; a feed-grain guide alone does not establish food-grade suitability. Record measured moisture, method and intended duration when a supported storage route becomes available. Crop · Source limits.