SteelThumb

Procedure · OKF v0.2

Harvest and thresh finger millet

Collect mature heads and distinguish threshing readiness from unresolved storage conditions.

Status: draft 5 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Harvest and thresh finger millet

Arrange clean collection and drying surfaces, a suitable threshing implement or machine, a way to contain separated grain and access to moisture measurement appropriate to finger millet. Identify food-purpose and planting-seed lots separately. The route does not supply a calibrated home moisture meter or sample protocol.

TNAU starts harvest when the main-shoot head and half the crop’s heads are brown.1

NaSARRI describes harvesting by hand with small knives.2

TNAU dries heads to 15% seed moisture before bamboo-stick or mechanical threshing.1

NaSARRI gives about 13% moisture after sun-drying for storage.2

TNAU gives 10% moisture for grain-purpose storage.1

Editorial work sequence: inspect maturity across the plot, cut the selected brown heads and retain immature ones for reassessment. NaSARRI supplies the hand-harvest action but not this numerical maturity cue. Using TNAU's cue and threshing direction with Ugandan establishment is a disclosed synthesis that still needs local confirmation. No fixed second-harvest date or induced-maturation heap is adopted for an unspecified cultivar and climate.

Dry the heads and arrange measurement of seed moisture before the selected threshing operation. For hand threshing, use the supported bamboo-stick method over the collection surface; for a machine use its own settings and operating instructions. Inspect output for retained grain and excessive breakage. Winnow and clean the separated grain as described by TNAU.1 Follow the blast handling boundary for suspect plants rather than dispersing them during ordinary processing.

Storage is not completed by threshing

The two final moisture endpoints differ and the inspected sources do not resolve the tradeoff for a given household's duration, climate and packaging. Do not average them or mistake the threshing endpoint for the storage endpoint. Obtain a grain service's moisture method and food-lot acceptance criteria before selecting a storage protocol. Record the method, reading and packaging decision; no shelf-life guarantee follows from these pages.

Cooking, milling, malting, nutrient composition and handling mold-damaged food remain separate research topics. No seed-treatment chemical is recommended for food grain. Crop · Sources.

Connected concepts (2)

Finger millet (ragi)

Ugandan field establishment with East African blast guidance and separately scoped Indian harvest evidence.

applies to · Crop
Inspect OKF v0.2 Claims & Evidence (5 claims, 2 sources)
#first-maturity recommendation brown head fraction at first harvest: 50 % (Together with brown main-shoot head; not 50% grain moisture.)

TNAU starts harvest when the main-shoot head and half the crop’s heads are brown.

Applicability: Indian guidance; applying this cue to the Ugandan route is an untested regional transfer.

Evidence: supports via tnau-finger (V. Harvesting — Decide when to harvest)

#cut recommendation

NaSARRI describes harvesting by hand with small knives.

Applicability: NaSARRI Uganda field guide; rain-onset, direct-sown grain crop.

Evidence: supports via nasarri-finger (PDF page 2, Harvesting)

#thresh recommendation head threshed seed moisture: 15 % (Moisture of seed in dried heads; source does not state wet/dry mass basis.)

TNAU dries heads to 15% seed moisture before bamboo-stick or mechanical threshing.

Applicability: Indian postharvest guidance, distinct from final storage drying.

Evidence: supports via tnau-finger (V. Harvesting — i. Threshing)

#uganda-storage recommendation storage moisture: 13 % (Approximate source endpoint; no mass basis, meter method or guaranteed duration given.)

NaSARRI gives about 13% moisture after sun-drying for storage.

Applicability: NaSARRI Uganda field guide; rain-onset, direct-sown grain crop.

Evidence: supports via nasarri-finger (PDF page 2, Storage)

#india-storage recommendation storage moisture: 10 % (Grain moisture; not room relative humidity or household drying time.)

TNAU gives 10% moisture for grain-purpose storage.

Applicability: Indian food-grain storage guidance; distinct from seed-purpose chemical treatment.

Evidence: supports via tnau-finger (V. Harvesting — Protection from storage pests, Grain purpose)