Assess and harvest durum wheat
Use identified durum wheat, a regionally suited harvest plan and an operator familiar with the equipment. Arrange grain drying, cleaning and assessment before cutting. Obtain a durum-appropriate moisture method and representative sampling plan; the source does not supply their calibration details.
Choose the harvest branch
The guide places swathing at 30% kernel moisture.1
At that stage kernels dent under pressure; straw can remain green, so assess grain firmness and color.1
The guide recommends direct harvesting below 14.5% moisture and describes that condition as suitable for storage.1
Swathing means cutting the crop into windrows for subsequent drying and collection. Direct harvesting takes the standing crop through the harvester. These are different operations with different entry conditions; the source does not supply cutter height, reel speed, threshing clearances or a pickup-moisture criterion after swathing. Obtain those from the operator/equipment guidance before execution. Chemical desiccation in the source is not included in this procedure.
Editorial field check: sample heads across contrasting patches and compare kernel firmness, color and measured moisture. Do not use green straw alone to postpone or trigger the operation. If patches differ, record them separately and resolve harvest sequencing with the operator. Check collected grain and the material left behind for unthreshed heads, lost kernels and breakage; adjust using equipment guidance and reassess subsequent samples. A garden-scissors method remains an untested adaptation candidate, not this source's validated route.
Cyprus research measurement boundary
The Cyprus study mechanically harvested plots and standardized reported grain yield to 12% moisture.2
The value above cannot resolve the Saskatchewan/NDSU storage difference. The methods do not give a complete operational harvest trigger or machine settings; obtain those before treating the plot method as a procedure to repeat.
Separate harvest from storage decisions
The Saskatchewan storage wording differs from NDSU’s wet-basis threshold. No average or universal value is selected. Confirm measurement basis, intended duration, temperature, aeration and grain condition with the processor before storage. The swathing threshold does not mean the cut grain is ready to store, and a dent test does not replace a moisture measurement.
Continue with grain cleaning and assessment. Neither cutting nor meeting a moisture threshold establishes food suitability. Source notes retain scope and unadopted material.