Harvest and process spelt
Purpose and prerequisites
Collect mature grain for subsequent food processing. Arrange an experienced operator, a spelt-appropriate moisture measurement, machinery instructions and a compatible dehulling service or machine. Home hand-cutting and hand-dehulling are not established by this collection.
Harvest and check
Harvest delay can increase spelt head-shattering losses.1
The NSW guide favors harvesting at grain moisture of 12% or less.1
Make a trial harvest run and check for damaged kernels, grain lost with chaff and heads left unthreshed.1
Mechanically dehull hulled spelt shortly before milling.1
Editorial workflow: inspect the collected sample and machine discharge during the trial run; adjust using the operator’s instructions before continuing. Keep suspect, damaged or visibly contaminated material separate for assessment. Clean-looking grain is not a complete food-quality test. Record moisture method, cultivar, weather and settings without inventing an acceptable loss percentage.
Small-farm dehulling evidence
Tudor distinguishes hull removal, aspiration of empty hulls, and separation of kernels still retaining hulls.2
The report describes sorting by size with a grain cleaner or by density with a gravity table, returning incompletely dehulled grain for another pass.2
Tudor changed to an emmer screen for a smaller-grained spelt lot from the drought year 2012.2
The built machine performed dehulling and aspiration; the report retained final separation as a subject for further research.2
Before selecting a machine or service, ask how each stage is handled and how the actual seed lot will be trialed. As an editorial acceptance workflow, keep fully dehulled kernels, partly hulled kernels and broken material distinguishable during a trial; inspect all output streams before increasing batch size. Record hull retention, damage and losses separately rather than using one throughput figure as a quality measure.
These descriptions identify operations and a reported adjustment, not universal settings or a fabrication specification. Obtain the actual operator instructions and a suitable cleaning/food-quality endpoint. The published experiment does not establish that its equipment is practical for a few garden plants. No household hand-dehulling method is claimed.
Comparative trial and evaluation limits
The comparison hand-sorted a 100 g output subsample into empty hulls, undehulled, dehulled and cracked fractions.3
Dehulling efficiency counted whole and broken dehulled kernels relative to sample mass after excluding empty hulls.3
Table 2 reports 94% dehulled grain for Tudor and 86% for Codema; their different Tukey letters indicate a significant difference in this trial.3
The researchers identified uncertain discharge timing and said Tudor and Beiler throughput estimates needed verification against operator experience.3
Use separate measures for hull removal, retained whole kernels and processing rate when reviewing a trial. A high dehulling percentage can include broken kernels and is not the mass yield of intact food grain. Compare equivalent stages: a dehuller outlet is different from a complete system after sorting. These editorial evaluation rules do not supply a universal acceptance threshold.
Machine feed quantities differed, and the source does not establish performance for every cultivar or moisture condition. The table’s Beiler and Trumpet cracking groups overlap, despite stronger wording in the narrative; do not claim that pair differs significantly. Current availability, costs and household-scale feasibility require separate evidence.
Vermont trial processing context
UVM harvested with an Almaco SPC50 plot combine, dehulled grain with a Trumpet Abrasion Dehuller, and measured test weight after dehulling.4
This confirms an equipment sequence used in a regional study; it does not supply machine settings or demonstrate hand-processing feasibility. Keep dehulled test-weight measurements distinct from measurements on hulled grain. No trial yield or food-contaminant threshold is adopted here.
Follow-up and unresolved work
Confirm the hull-removal endpoint before milling; threshing and dehulling are different decisions. Equipment settings, throughput, cleaning standards and a small-garden dehulling method need further evidence. Storage duration, drying procedure and moisture calibration are also unresolved. Do not turn the harvest moisture reference into a shelf-life guarantee.
Spelt crop · Establishment · Sources.
-
Robyn Neeson — Organic spelt production, Primefact 1091, March 2011. ↩↩↩↩
-
Nigel Tudor, Weatherbury Farm — Farmer Built Spelt Dehuller, SARE FNE11-731 final report. ↩↩↩↩
-
Elizabeth Dyck / OGRIN — SARE LNE17-357 final report, dehuller research. ↩↩↩↩
-
Heather Darby, John Bruce and Anna R. Brown — 2023 Spelt Variety Trial, UVM Extension, January 2024. ↩