Harvest and begin processing white fonio
Before cutting, obtain an observable maturity test for the named white-fonio cultivar. The manual calls for ripe grain without a sufficiently precise novice test; this decision remains blocking for an unidentified cultivar; the separate CVF 109 option below adds named-variety cues. Arrange collection material, protected drying space and access to a processor experienced with the actual grain.
Cut mature, dried plants with a knife or sickle and gather sheaves.1
Delayed harvest increases risks from shedding, birds and mold.1
Record the readiness evidence and date. Keep abnormal material separate pending grain-quality advice. Tool choice and clean, labeled collection containers are local setup decisions. No universal cutting height or number of growing days is prescribed.
CVF 109 readiness and separation option
The CVF 109 sheet describes whole-plant yellowing and stem bending as maturity signs.2
It describes manual threshing with flails or sticks on mats or plastic sheets, followed by winnowing.2
Use the cue with identified CVF 109 and local confirmation. Yellowing or a bent stem alone may also require investigation; compare filled grain and the whole planting with an experienced grower before cutting. Retain the existing knife/sickle action above. Confirm tool handling through a small-batch demonstration, catching seed and checking losses after threshing and winnowing. Historical bare-earth/cow-dung threshing surfaces are not adopted. The sheet’s moisture ranges lack a measurement basis/calibration here and do not close storage approval. Neither a calendar day count nor these visual cues certify food quality.
Dry and separate carefully
Check drying sheaves for internal heating; dismantle heating piles.1
For manual threshing, use a cloth surface to limit sand contamination.1
Dehulling removes husks; whitening removes the fruit wall and germ.1
Check the collected material and air movement regularly. A heating pile needs the stated response and separate quality assessment; this is not a salvage protocol. Obtain a demonstration of threshing and subsequent dehulling, observing grain left in heads, sand, hull remnants and losses. The distinctions above do not supply a machine setting or prove that finished grain is ready to eat.
The route remains partial until a processor supplies measured drying, cleaning and dehulling endpoints. Do not treat elapsed drying days or a finger-flow test as a calibrated moisture measurement. Require the measurement basis, representative sample and suitable instrument calibration before setting storage conditions. No cooking recipe, shelf-life guarantee or contaminated-grain rescue is established. See source review.