Harvest and peel true-cinnamon stems
Use an identified established bark-production bush, clean sharp cutting and peeling tools, a brass rubbing rod, and a clean raised working surface. Arrange a processing destination before cutting. Skilled peeling practice is needed; this is not a prescription to strip the main trunk of an unidentified ornamental tree.
Select stems with brown outer bark; peeling is easier after new leaves turn green.1
Cut selected stems cleanly 1½–2 inches above ground at a 45-degree angle toward the bush.1
Scrape off the brown outer bark while keeping cut stems off the ground.1
Rub scraped stems with a brass rod, then lift the loosened bark with a peeling knife.1
Editorial sequence: inspect stem and leaf stage, select the harvestable stems and make controlled cuts without injuring the remaining stool. Remove side branches, leaves and immature tips; bring the selected sections to the clean work surface. Scrape, rub and lift the bark in manageable sheaths or strips, keeping collected material free from soil. Record stem condition, ease of peeling and harvested mass. Stop and investigate unexplained lesions or persistently rough bark using the care procedure.
Observe the stool's subsequent shoots separately from the harvest record. The time to first harvest differs between the Sri Lankan and Indian guidance and is not used here as a universal maturity guarantee.
This task ends at clean peeled bark. Commercial quill formation, controlled drying, representative moisture measurement, grading, packaging and storage require further instructions before a finished-spice outcome can be claimed. The source's drying summary is not a verified household shelf-life recipe. Crop · Sources.