SteelThumb

Procedure · OKF v0.2

Grow and harvest a Mori nameko kit

Illustrated supplier route for a cased nameko kit, distinct from uncased seasonal blocks.

Status: draft 10 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Grow and harvest a Mori nameko kit

Match the product

Use an identified nameko Mori no Nameko Nouen kit matching the inspected leaflet: colonized block in its culture bag, separate outer growing bag and supplied akadama casing. Retain the lot and instructions; if packaging or directions differ, resolve that with the supplier first. Have clean cutting tools, a spoon, water, a mister and temperature measurements. This task starts with a prepared block, not raw substrate or spawn.

Set up

Use a site maintaining 10–15°C, with night minima at or below 10°C for pin initiation.1

Keep the block in its culture bag; cut that bag about 5 cm above the block.1

Unless small pins are already present, scrape the top white film to expose brown substrate.1

Hold water on the block top for about 30 minutes, then drain remaining water.1

Moisten and drain the supplied akadama, then cover the block top with a 1–2 cm layer.1

Put the bagged block into the supplied outer growing bag and keep its top roughly half open.1

Editorial handling sequence: check for existing pins before scraping. The source tells readers to skip scraping when pins are already present and begin with its watering stage. Keep the inner bag around the block throughout setup; the outer bag serves a different role. Do not substitute Kinokkusu's cap-loosening and later bag-removal sequence.

Care, harvest and follow-up

Mist when casing becomes dry and pale, maintaining moist casing; the leaflet suggests roughly one or two applications daily.1

Harvest as caps enlarge and the membrane underneath breaks.1

Cut stems at their base with scissors or a craft knife and remove adhering soil before eating.1

After harvest, resume the same moisture care; another crop may develop following a rest period.1

If pins are absent, log both daytime and nighttime temperatures, casing condition and bag opening before changing care. Confirm the kit experienced the specified cool-night condition with the supplier. A missing pinning date alone does not prove contamination or a dead culture. For unexpected growth, odor or deterioration, stop food use and ask the supplier to assess the actual kit; this reference is not a contaminant-identification key.

Harvest timing is a development cue for this kit, not a species-identification test. Keep unexpected mushrooms separate pending reliable identification. Record actual harvest date/mass and later pinning separately; repeat flushes and yield are not guaranteed. The leaflet's cooked-recipe example on PDF page 9 boils nameko before combining it with grated daikon; this is a culinary example, not a quantified cooking or preservation validation. Obtain appropriate cooking instructions before serving; no raw-eating or storage-life claim is made here.

Source and visual inspection.

Connected concepts (2)

Cultivated nameko

Nameko with an initial supplier-specific outdoor plug-spawn log route.

Referenced by Crop
Inspect OKF v0.2 Claims & Evidence (10 claims, 1 sources)
#temperature recommendation kit growing temperature: 10–15 degC (Mori kit daytime growing conditions; night minimum at or below 10°C specified separately)

Use a site maintaining 10–15°C, with night minima at or below 10°C for pin initiation.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 5 and conditions notes)

#open recommendation bag cut height: 5 cm (Above block top, not cut depth into substrate)

Keep the block in its culture bag; cut that bag about 5 cm above the block.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 1)

#scrape recommendation

Unless small pins are already present, scrape the top white film to expose brown substrate.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 2)

#soak recommendation surface soak duration: 30 minute (Top watering within retained culture bag; not whole-block immersion)

Hold water on the block top for about 30 minutes, then drain remaining water.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 2)

#case recommendation casing depth: 1–2 cm (Supplied akadama across block top)

Moisten and drain the supplied akadama, then cover the block top with a 1–2 cm layer.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 3)

#outer recommendation

Put the bagged block into the supplied outer growing bag and keep its top roughly half open.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, steps 4–5)

#mist recommendation approximate daily misting frequency: 1–2 event/day (Mori kit estimate tied to drying casing, not fixed water volume)

Mist when casing becomes dry and pale, maintaining moist casing; the leaflet suggests roughly one or two applications daily.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 4)

#ready recommendation

Harvest as caps enlarge and the membrane underneath breaks.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 6)

#cut recommendation

Cut stems at their base with scissors or a craft knife and remove adhering soil before eating.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 6)

#repeat recommendation

After harvest, resume the same moisture care; another crop may develop following a rest period.

Applicability: Mori no Nameko Nouen kit in the inspected leaflet, including supplied casing and outer bag. Not Kinokkusu blocks or outdoor logs; confirm instructions match delivered kit.

Evidence: supports via mori-nameko-kit (PDF page 10, step 6)