SteelThumb

Procedure · OKF v0.2

Grow dry common beans: Washington garden route

Ground establishment and care through pod dry-down, with local stock and irrigation inputs.

Status: draft 7 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Grow dry common beans: Washington garden route

Choose and prepare

Use labeled dry common-bean seed and a local maturity/resistance description, a drained bed, water, a soil test and a depth measure. For a climbing selection obtain a support plan from its supplier; this procedure does not size a trellis from a generic dry-bean name. WSU recommends selecting resistance to locally common diseases (printed p.1, Selecting Types to Plant).1 Before sowing, resolve frost risk and whether the stock can finish dry seed before the site's autumn wet season.

Choose fertile, well-drained soil with at least six hours of direct sun daily.1

Test soil before planting and select fertilizer for the reported phosphorus and potassium needs without overapplying nitrogen.1

Sow 1½–2 inches deep; bush spacing is 2–3 inches in rows 18–30 inches apart, pole spacing 4–6 inches in rows 36–48 inches apart.1

The planting table lists emergence in 6–14 days and an optimum soil-temperature range of 60–85°F.1

The source's overview row-spacing card is less specific than its bush/pole table; this procedure retains the table branches. Its germination interval is regional guidance, not a guarantee. Seed inoculation requires a current bean-compatible product and its directions; an organism name alone is not an application recipe.

Care and dry-down

Apply water at plant bases; both excessive and insufficient water can cause flower or pod loss.1

Stop irrigation when pods turn yellow so they can dry.1

Herbicide-contaminated mulch or compost can deform beans and resemble virus symptoms.1

A universal water dose is deliberately unresolved: the older manual and later WSU grower article use different irrigation bases. Before planting, obtain a locally appropriate water plan for the soil and climate. Editorial monitoring: record rain, irrigation and root-zone moisture through flowering; adjust with local advice rather than treating one missing pod as proof of drought. Keep established rows weed-free without pulling bean plants (WSU p.3, Weed Control).1 Record weed-control actions as an editorial follow-up.

For deformed growth, review amendment provenance and compare affected and unaffected beds. Refer specimens and material history to extension for differentiation from disease; this is not a visual diagnosis or a validated rescue treatment. Observe new growth and retain the affected lot's history before reusing it. If pods remain green as weather deteriorates, seek local maturity/harvest advice rather than assuming all immature seed will finish indoors.

Harvest and shell · Crop hub.

Connected concepts (2)

Dry common bean

Common beans for mature seed, including ground production, hand harvest and kidney-bean cooking boundaries.

applies to · Crop
Inspect OKF v0.2 Claims & Evidence (7 claims, 1 sources)
#site recommendation minimum direct sun: 6 h/day (Garden site, not an indoor lighting recipe.)

Choose fertile, well-drained soil with at least six hours of direct sun daily.

Applicability: WSU FS135E, April 2014; Washington dry common-bean garden production, bush and pole branches.

Evidence: supports via wsu2014 (Printed pp.1–2, Choosing a Planting Site)

#fertility recommendation

Test soil before planting and select fertilizer for the reported phosphorus and potassium needs without overapplying nitrogen.

Applicability: WSU FS135E, April 2014; Washington dry common-bean garden production, bush and pole branches.

Evidence: supports via wsu2014 (Printed p.2, Planting Guidelines, soil-test paragraph)

#layout recommendation sowing depth: 1.5–2 in (Table applies to bush and pole dry beans; their spacing branches differ.)

Sow 1½–2 inches deep; bush spacing is 2–3 inches in rows 18–30 inches apart, pole spacing 4–6 inches in rows 36–48 inches apart.

Applicability: WSU FS135E, April 2014; Washington dry common-bean garden production, bush and pole branches.

Evidence: supports via wsu2014 (Printed p.2, Planting Guide for Bush and Pole Beans table)

#emergence descriptive emergence interval: 6–14 d (After sowing; table optimum soil temperature 60–85°F, not air temperature.)

The planting table lists emergence in 6–14 days and an optimum soil-temperature range of 60–85°F.

Applicability: WSU FS135E, April 2014; Washington dry common-bean garden production, bush and pole branches.

Evidence: supports via wsu2014 (Printed p.2, planting table, No. Days to Germinate and Optimum Soil Temp. Range)

#water-stage recommendation

Apply water at plant bases; both excessive and insufficient water can cause flower or pod loss.

Applicability: WSU FS135E, April 2014; Washington dry common-bean garden production, bush and pole branches.

Evidence: supports via wsu2014 (Printed p.2 Watering, final paragraph, continuing p.3)

#dry-down recommendation

Stop irrigation when pods turn yellow so they can dry.

Applicability: WSU FS135E, April 2014; Washington dry common-bean garden production, bush and pole branches.

Evidence: supports via wsu2014 (Printed p.3, Watering continuation)

#residue-damage descriptive

Herbicide-contaminated mulch or compost can deform beans and resemble virus symptoms.

Applicability: WSU FS135E, April 2014; Washington dry common-bean garden production, bush and pole branches.

Evidence: supports via wsu2014 (Printed p.3, Weed Control, herbicide-residue paragraph)