Use this protocol to establish Chard Microgreens in standard draining flats matching Indoor Microgreen Trays. Swiss chard shares Beta vulgaris's corky multigerm seed-ball structure with beet microgreens but benefits specifically from fuller thin burial ("cover best") and patient blackout timing so bright multicolor petioles emerge synchronously.
1. Check Seed Processing Type Before Weighing
- Confirm untreated or certified organic seed (
'Bright Lights','Ruby Red','Rainbow Sprinkles Mix'); never sow chemically treated or clay-pelleted row-crop seed into shallow indoor flats 63. - Decorticated (rubbed) vs raw glomerules: Mechanically rubbed lots such as
'Bright Lights'(703D,~30,400 seeds/lb) shed corky outer bracts more evenly than unrubbed lots (~25,700 seeds/lb), so note seed processing on tray logs when dialing seeding weights 3.
2. Pre-Soak & Rinse (or Pre-Germinate in Vermiculite)
- Standard soak (
6–12 hours): Submerge weighed chard seed balls in cool potable water for6–12 h, then drain and rinse thoroughly with fresh potable water to leach water-soluble germination inhibitors retained inside corky glomerule bracts 18. - Commercial moist-vermiculite alternative: Lee et al. (2004, cited in Murphy 2006) tested both beet and chard microgreens and confirmed aerated moist fine-vermiculite pre-germination (
~20 °C) outperforms static hydrogen-peroxide or raw water soaks when synchronizing emergence prior to planting 8.
3. Fill Mix & Broadcast Across Matched Flats
- Fill sanitized draining 1020 flats evenly to
1–1.5 in(2.5–3.8 cm) with fresh, dampened peat-lite or buffered coir-vermiculite mix (pH ~5.7), tamping corners flat so multicolor seed balls do not pool along tray margins 168. - Seeding rate selection (
15–31.5 g/1020 flat): Use~25–31.5 g/1020 tray(~6–8 glomerules/sq in, matching Johnny's703DM'Bright Lights'yield trial mean31.5 g/tray) under bright lighting and forced-air fans; drop closer to10–15 g/trayin unlit cool winter greenhouses (Penn StateRuby Red rate) or whenever taller rainbow true leaves need extra airflow 462.
4. Burial Cover & Weighted Blackout to Strip Coats
- Press seeded clusters firmly into damp media with a clean flat block 5.
- Cover completely (
3–6 mm/1/8–1/4 in): Unlike tiny brassicas or mucilaginous herbs sown bare on the surface, UF/IFAS specifically classifies Swiss chard as "cover best" — sift a clean3–6 mmcap of fine potting mix or fine vermiculite evenly over the clusters and mist gently until damp 25. (Wet paper towels can also be draped smoothly and peeled up at day 3–4 to pull loose husks away 5.) - Weighted blackout (
4–5 days): Stack a sanitized inverted 1020 flat weighted cleanly with2–5 lb(~1–2 kg) atop the covered seeds for the first2–3 daysat65–75 °F, then flip/prop to a vented dome for days3–5as colorful hypocotyls push evenly through the top-dressing and anchor their roots downward 75. Multicolor mixes like'Bright Lights'may stagger slightly by pigment line — wait until most trays show uniform emerging loops before exposing to light.
5. Lights, Airflow, Bottom Watering & Optional Feed
- Uncover under
16–18 h/daygrow lighting (<20 mol/m²/dayDLI) with steady horizontal airflow fans once seedlings straighten 165. Keep temperatures around65–75 °F(UMD 70–75 °F); avoid sustained heat>75 °F(24 °C) that invites damping-off 51. - Bottom-water strictly via catch tray (
~150–200 mLsoak, draining excess) whenever trays lighten, keeping leaves and cotyledons dry to suppress damping-off and seed-borne Cercospora 16. - If using nutrient-free coir or growing slow multicolor trays past day
14showing pale chlorosis, apply50–100 ppm N(20-10-20or hydroponic solution) via sub-irrigation rather than foliar misting 65.
-
UMD Extension: Growing Microgreens and Baby Greens Indoors ↩↩↩↩↩
-
Johnny's Selected Seeds: Bright Lights Swiss Chard Seed (703D) ↩↩
-
Johnny's Selected Seeds: Micro Greens Yield Trial Comparison Chart ↩
-
Johnny's Selected Seeds: Microgreens Production Tech Sheet ↩↩↩↩↩↩↩
-
Murphy (2006): Greenhouse Production of Microgreens (UDel MS Thesis) ↩↩↩