SteelThumb

Procedure · OKF v0.2

Establish, Propagate, and Pollinate Amla

Procedure reference profile in SteelThumb Almanac.

Status: draft 5 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Procedure for Amla (Phyllanthus emblica): raising sinker-tested rootstocks, clonal budding, top-working inferior seedlings, designing cross-pollinated blocks, and pit establishment.

Rootstock Seed Extraction and Clonal Propagation

  1. Extract and float-test rootstock seed: Gather overripe drupes, sun-dry to split the tough hexagonal stone (6 seeds inside) or carefully cut open through the stone, then run a water float test—100% of seeds that sink normally germinate1.
  2. Bud or graft rather than rooting cuttings: Air-layers and stem cuttings perform poorly in field trials (University of Miami), and inarching gives low post-separation survival (25–30%)1. Instead: - Propagate named clones ('NA-7', 'NA-6', 'Krishna' (NA-4), 'Kanchan' (NA-5), 'Chakaiya', 'Banarasi', 'BSR-1') by Forkert or patch budding (85–100% success), shield budding on 1-year rootstocks, or chip budding (60–80% on 1.5-year stock) during June–September or February–March (~8 mm rootstock stem diameter at 4+ months)132.
  3. Top-working low-value seedling trees: Cut back mature inferior trees to 1.2 m (4 ft) in dormant March, seal cut stubs cleanly, and bud the vigorous summer shoots between June and September1.

Cross-Pollination Orchard Layout

Because 'NA-7' (2.35% selfed vs 61.43% open-pollinated fruit set) and 'Banarasi' suffer severe sporophytic self-incompatibility and flower drop (up to 70%) in single-clone blocks, never plant one cultivar alone41:

  • Pair 'NA-7' with 'NA-6', 'Krishna' (NA-4), or 'Chakaiya' in alternating rows or distributed pollinizer positions4.
  • Pair 'Banarasi' with 'Chakaiya' or 'NA-6' (or scatter compatible seedling pollinizers where permitted) and retain flowering habitat for morning/evening honeybees41.
  • Pair 'Kanchan' (NA-5) with 'NA-6' and 'Chakaiya' with 'Francis' (watching 'Francis' closely for boron fruit necrosis)41.

Pit Preparation and Regional Spacing Choices

  1. Pit solarization and backfill: Dig 1.0 × 1.0 × 1.0 m pits (up to 1.25 × 1.25 m per TNAU) in May–June, expose open pits to sun for 15–20 days, then blend surface soil with 15 kg farmyard manure and 0.5 kg phosphorus (eAgri) or composted manure prior to July–August monsoon planting321.
  2. Select spacing by pruning regime and site (do not average): - Intensive hedged/pruned blocks (4.5 m): eAgri recommends 4.5 m spacing for compact managed trees3. - Standard Indian commercial spacing (6.0 × 6.0 m): TNAU specifies 6.0 × 6.0 m (July–August planting)2. - Unrestricted full-canopy trees (9.0–12.0 m / 30–40 ft): Morton recommends 9.0–12.0 m where trees grow to natural multi-decade 8–18 m dimensions13.
  3. Protect juveniles for 3 years: Provide wind/sun shelter from dry hot May–June winds and wrap trunks against winter frost for the first 3 years while watering every 15 days in summer until established31.

  1. https://hort.purdue.edu/newcrop/morton/emblic.html ↩↩↩↩↩↩↩↩↩↩

  2. https://agritech.tnau.ac.in/horticulture/horti_fruits_amla.html ↩↩↩

  3. http://eagri.org/eagri50/HORT282/pdf/lec31.pdf ↩↩↩↩↩

  4. https://agrimagazine.in/wp-content/uploads/2025/07/E-AGM-02-07-126-450-456.pdf ↩↩↩↩

Connected concepts (2)

Amla

Crop

applies to · Crop
Inspect OKF v0.2 Claims & Evidence (5 claims, 4 sources)
#amla-budding-take-rate recommendation budding take rate: 85–100 percent (Forkert and patch budding success reported by Morton)

Propagate elite amla cultivars onto 1-year seedling rootstocks by Forkert or patch budding (85 to 100% take), shield budding, or chip budding (60 to 80% take) during June-September or February-March rather than inarching (25 to 30% take) or stem cuttings.

Evidence: supports via morton_1987_emblic (Propagation); supports via eagri_lec31 (Propagation)

Always plant at least two cross-compatible budded cultivars together—for example NA-7 paired with NA-6, Krishna (NA-4), or Chakaiya, or Banarasi paired with NA-6 or Chakaiya—to overcome sporophytic self-incompatibility.

Evidence: supports via priyanka_2025_si (Sporophytic self-incompatibility - Aonla); supports via morton_1987_emblic (Pollination)

#amla-spacing-tnau-6m recommendation tree spacing: 6.0 m (TNAU Tamil Nadu commercial spacing)

TNAU commercial practice spaces budded or grafted amla orchards at 6.0 x 6.0 m in 1.0 x 1.0 m (to 1.25 x 1.25 m) planting pits during July-August.

Evidence: supports via tnau_amla (Planting)

#amla-spacing-eagri-45m recommendation tree spacing: 4.5 m (eAgri HORT282 lecture spacing recommendation)

eAgri HORT282 orchard guidance places pits of 1 m2 exposed to sun for 15-20 days at a closer 4.5 m spacing.

Evidence: supports via eagri_lec31 (Planting)

#amla-spacing-morton-wide recommendation tree spacing: 9.0–12.0 m (Morton wide orchard spacing for mature 8-18 m trees)

Historical subtropical orchard guidance for full-stature trees recommends 9.0 to 12.0 m (30 to 40 ft) spacing.

Evidence: supports via morton_1987_emblic (Culture)