Sun-dry and inspect rice paddy: Philippine guidance
Scope and preparation
Start with identified, threshed paddy and choose weather suitable for attended drying. Arrange a clean drying area, stirring tool, rain protection, containers and a paddy-calibrated moisture meter with its manual. This is Philippine guidance linked as a processing option from other regional crops; transferring it to a different climate is an editorial adaptation. No fixed number of sunny days establishes completion.
Dry and measure
Use a clean drying surface and spread paddy 2–4 cm deep.1
For sun-drying on clean concrete, stir at least every 30 minutes and protect dried paddy from rain.2
PalayCheck gives a 12–14% moisture target for dried grain.2
Use the grain-moisture method’s rice supplement and the actual instrument instructions. Keep raw readings and sampling locations; do not hide a wet pocket in a lot-wide mean. Resolve moisture basis, sampling/temperature requirements and the destination’s acceptance target before comparing readings with the source range. This page does not supply those missing controls for an unidentified meter.
The older FAQ permits a longer turning interval than the manual; the step above deliberately follows the manual’s more frequent schedule. Layer depth comes from the FAQ and is a disclosed cross-document combination. The Nigerian upland reference retains its own thinner layer and drying target; do not average source settings.
Clean, protect and inspect
Keep dried grain on pallets while it awaits cleaning.2
Remove chaff, empty grains and straw; clean the grain cleaner before use.2
Use waterproof, ventilated, pest-protected storage, separate from agricultural chemicals, fertilizer and cement.2
Inspect stored stacks at least weekly for pests, damage and water stains indicating rewetting.2
Follow-up and limits
Editorial record: retain lot/cultivar, drying start/stop, layer depth, stirring, weather, grain temperature, moisture samples, instrument calibration, cleaning and storage inspections. If rain rewets grain or readings vary, reassess the lot and drying conditions before storage. Unexpected heating, odor, pests or visible damage require investigation; a later moisture reading cannot establish that damaged grain is fit to eat.
The source does not establish one storage life for every package, climate or starting quality. This is not a fumigation, seed-preservation, toxin-testing or cooking protocol. Hulling is separate from threshing and drying. Lowland rice · Upland rice · Source inspection.
For a matching instrument and long-paddy sample, consult the PM-450 Version 4501 measurement example. Other rice types and instruments need their own matching calibration and manual.