SteelThumb

Guide · OKF v0.2

Observe climate around protected raspberries

Sensor placement and interpretation before selecting local operating settings.

Status: draft 3 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Observe climate around protected raspberries

Use with the Swedish greenhouse-pot route or the soil-grown tunnel. These are observation decisions; they do not supply a universal ventilation or heating controller.

Place temperature sensors within the crop near the tunnel or greenhouse center, shaded from direct sunlight.1

Calibrate electronic humidity measurement equipment annually.1

Use photon-based measurements when assessing light available for plant photosynthesis.1

Editorial measurement plan: retain instrument model, units, location, height, shading arrangement, calibration record and timestamps. Follow the instrument's actual calibration procedure. Record vent/heater state and outside weather with internal readings; compare several crop positions when deciding whether one location represents the whole structure. Sensor contact with foliage, direct sun exposure or a changed placement can confound comparisons.

Keep light measurements distinct from photoperiod and from human brightness units. This guide does not define a target photon flux, daily light integral or integration method. A measurement alone is not a crop-response threshold.

For heat-associated leaf damage, compare temperature history, moisture and emitter function before inferring a cause. Use cane-decline triage for the distinction between spent canes and replacement decline. The observed pattern may require a separate pest or disease assessment. Record the action taken and subsequent condition without calling an untested adjustment effective.

The 2011 source discusses climate ranges and multiple controls, but original experiments and cultivar-specific response curves have not been reviewed here. Those settings remain research leads rather than automatically executable thresholds.

Connected concepts (3)

Raspberry

Cultivated raspberry hub with an initial red/yellow compact-container route.

Referenced by Crop
Inspect OKF v0.2 Claims & Evidence (3 claims, 1 sources)
#sensor recommendation

Place temperature sensors within the crop near the tunnel or greenhouse center, shaded from direct sunlight.

Applicability: Swedish protected raspberry production advisory, 2011; historical regional recommendations, not a current cultivar trial or all-climate recipe.

Evidence: supports via slu-nilsson-2011 (p. 4 — continuation of Klimatstyrning)

#humidity recommendation humidity calibration interval: 1 year (Source advisory; actual instrument procedures and shorter manufacturer intervals still apply.)

Calibrate electronic humidity measurement equipment annually.

Applicability: Swedish protected raspberry production advisory, 2011; historical regional recommendations, not a current cultivar trial or all-climate recipe.

Evidence: supports via slu-nilsson-2011 (p. 4 — continuation of Klimatstyrning)

#light recommendation

Use photon-based measurements when assessing light available for plant photosynthesis.

Applicability: Swedish protected raspberry production advisory, 2011; historical regional recommendations, not a current cultivar trial or all-climate recipe.

Evidence: supports via slu-nilsson-2011 (p. 4 — continuation of Klimatstyrning)