Coffee wet-processing decisions
The Hawaiian wet route separates pulping, mucilage removal, drying and later hulling.1
The manual describes fermentation and mechanical removal as alternative ways to remove mucilage.1
Kona sun-drying platforms are described with periodically turned beans and protection from rain.1
Choose the process before picking
Collect a selected ripe lot only after arranging its processing destination. The inspected manual is a Hawaiian production guide. It does not validate every household-scale adaptation, natural whole-cherry process, honey process or Indonesian wet-hulling practice.
| Stage | Decision still required for a complete procedure |
|---|---|
| Pulping | Select equipment and follow its cleaning, adjustment and operating instructions; inspect for damaged beans |
| Mucilage removal | Choose fermentation or mechanical removal; specify equipment, lot size and monitored endpoint |
| Drying | Select a weather-protected bed or suitable dryer; define airflow, load, sampling and actual product-temperature controls |
| Measurement | Use a suitable calibrated meter and a representative sampling plan; check measurement reliability |
| Hulling, storage and roasting | Obtain equipment-specific instructions, product acceptance criteria and measured storage controls |
The manual's fermentation example concerns a substantial vat that retains self-generated heat. Its elapsed time cannot simply be copied into a small kitchen vessel. A loss of slipperiness is described as a mucilage-removal cue, not a comprehensive microbiological acceptance test. No home fermentation recipe is asserted here.
Drying evidence that needs reconciliation
The production manual gives an approximate moisture range, while the companion measurement publication emphasizes a narrower upper quality limit and explicitly discusses wet-basis moisture. Their numerical advice should not be flattened into a single default without deciding product stage, analytical basis, equipment accuracy and intended storage. Neither historical source proves a current legal trading standard. These differences are recorded in the source audit.
The drying chapter also uses both bean and incoming-air temperature language. A heater setpoint, drying-air temperature and measured bean temperature are different quantities. The chapter's short summary omits some equipment-specific distinctions from the main text. A future dryer procedure must preserve measurement location and equipment type.
Moisture measurement is necessary process information, but it alone cannot establish that a previously spoiled lot is usable. This guide records the missing decisions rather than supplying a shelf-life guarantee. Coffee hub · Sources.