SteelThumb

Guide · OKF v0.2

Plan Brussels sprout nursery, spacing and harvest in Ontario

Ontario nursery settings and commercial field guidance separating repeated picking from a single harvest.

Status: draft 8 claims License: MIT Rev: 54d2abbe6163 Raw OKF (.md) Source on GitHub

Plan Brussels sprout nursery, spacing and harvest in Ontario

Choose the intended harvest method for Brussels sprouts before laying out the field. This guide extracts Ontario's decision points, not a complete transplant-production protocol. Cultivar and local planting date still require selection.

Nursery reference settings

Ontario lists a Brussels sprout sowing depth of 0.6 cm.1

The table gives 27 °C for germination and five days to germination under optimum conditions.1

For growing Brussels sprout transplants, Ontario lists 16–21 °C by day and 10–16 °C at night.1

These values describe a transplant nursery. They do not supply plug-cell size, medium, lighting, irrigation, feeding, hardening or a complete field-setting task. Match actual seed-lot and nursery instructions before starting; record emergence and seedling condition instead of treating the stated germination interval as a deadline for discarding seed.

The Swedish supplier branch cautions against prolonged temperatures below 14 °C. Ontario's night range extends below that value. Duration, cultivar and production context have not been reconciled; do not average the two or present either as a universal minimum. Keep the selected nursery method and temperature record together when investigating poor growth or premature development.

Layout follows harvest purpose

Ontario lists rows 75–90 cm apart and plants 45–60 cm apart within rows.1

For once-over harvest or smaller sprouts for freezing, Ontario gives square layouts of 60 × 60 cm or 53 × 53 cm.1

These are distinct source layouts; the square alternatives do not redefine the general row recommendation. They are not pot diameters or hydroponic planting-hole distances. No comparative yield advantage is claimed here.

Repeated versus single harvest

For repeated picking, harvest firm, well-formed sprouts; upper sprouts continue developing as lower ones are picked.1

For single harvest, Ontario places topping at a lower-sprout diameter of about 12–20 mm.1

For the single-harvest branch, do not remove leaves more than one day before harvest.1

The printed topping cue pairs 12–20 mm with ½–1 inch; the upper limits are not equivalent. This guide preserves the metric text and leaves that discrepancy unresolved, rather than silently expanding it to 25.4 mm. The Swedish guide retains its own cue and winter-hardiness caution. Neither document proves the other region's cultivar response.

For individual picking, follow the physical action in the existing harvest procedure, an explicit cross-source continuation. A complete single-stem harvest task still needs a supported stem-cutting/handling method; this guide does not invent one. Topping means removing the growing tip, not stripping all leaves. Do not turn the conditional de-leafing limit into a routine repeated-picking step.

Record and investigate

Editorial record: cultivar, planting layout, intended harvest method, lower-sprout diameter, topping and leaf-removal dates, actual harvest condition. Compare observed uniformity and continued bud formation; these are proposed observations, not supplied trial outcomes. For loose or poorly formed sprouts use the care investigation, reviewing temperature, water and nutrients before assigning a cause.

Complete nursery operation, local timing, soil-test/product-specific nutrients, winter protection and controlled systems remain open. The manual's maturity and storage columns are not used as guaranteed harvest dates or a storage procedure. Source notes.

Connected concepts (2)

Brussels sprouts

Cool-season stem-bud crop with Minnesota establishment and explicit regional alternatives.

Referenced by Crop
Inspect OKF v0.2 Claims & Evidence (8 claims, 1 sources)
#layout recommendation row spacing: 75–90 cm (General field layout; within-row interval retained in statement.)

Ontario lists rows 75–90 cm apart and plants 45–60 cm apart within rows.

Applicability: Ontario commercial field Brussels sprouts; harvest-purpose branches, not container or nutrient-solution settings.

Evidence: supports via omafra839-2024 (Printed p. 108, Table 7–19, Brussels sprouts row)

#single-layout recommendation square layout option: 60 cm (First listed option on both axes; 53 cm is an alternative, not a range endpoint.)

For once-over harvest or smaller sprouts for freezing, Ontario gives square layouts of 60 × 60 cm or 53 × 53 cm.

Applicability: Ontario commercial field Brussels sprouts; harvest-purpose branches, not container or nutrient-solution settings.

Evidence: supports via omafra839-2024 (Printed p. 108, Table 7–19, footnote 2)

#repeated recommendation

For repeated picking, harvest firm, well-formed sprouts; upper sprouts continue developing as lower ones are picked.

Applicability: Ontario commercial field Brussels sprouts; harvest-purpose branches, not container or nutrient-solution settings.

Evidence: supports via omafra839-2024 (Printed p. 111, Table 7–24, multi-pick row)

#topping recommendation lower sprout diameter at topping: 12–20 mm (Printed metric cue; source inch equivalent is inconsistent.)

For single harvest, Ontario places topping at a lower-sprout diameter of about 12–20 mm.

Applicability: Ontario commercial field Brussels sprouts; harvest-purpose branches, not container or nutrient-solution settings.

Evidence: supports via omafra839-2024 (Printed p. 111, Table 7–24, single-harvest row)

#leaves recommendation maximum preharvest deleafing interval: 1 day (Conditional timing if removing leaves; not a command to defoliate a repeatedly picked crop.)

For the single-harvest branch, do not remove leaves more than one day before harvest.

Applicability: Ontario commercial field Brussels sprouts; harvest-purpose branches, not container or nutrient-solution settings.

Evidence: supports via omafra839-2024 (Printed p. 111, Table 7–24, single-harvest row)

#nursery-depth recommendation sowing depth: 0.6 cm (Transplant-production table, metric value.)

Ontario lists a Brussels sprout sowing depth of 0.6 cm.

Applicability: Ontario Publication 839, Brussels sprout transplant-production row; controlled nursery values, not field hardiness or hydroponic mature-crop settings.

Evidence: supports via omafra839-2024 (Printed p. 107, Table 7–18, Brussels sprouts row)

#nursery-germination recommendation germination temperature: 27 degC (Listed optimum; five days is a conditional estimate, not an emergence guarantee.)

The table gives 27 °C for germination and five days to germination under optimum conditions.

Applicability: Ontario Publication 839, Brussels sprout transplant-production row; controlled nursery values, not field hardiness or hydroponic mature-crop settings.

Evidence: supports via omafra839-2024 (Printed p. 107, Table 7–18, Brussels sprouts row and footnotes 1–2)

#nursery-growing recommendation nursery day temperature: 16–21 degC (Day range; separate night range retained in statement.)

For growing Brussels sprout transplants, Ontario lists 16–21 °C by day and 10–16 °C at night.

Applicability: Ontario Publication 839, Brussels sprout transplant-production row; controlled nursery values, not field hardiness or hydroponic mature-crop settings.

Evidence: supports via omafra839-2024 (Printed p. 107, Table 7–18, Optimum Growing Temperature columns)