---
type: Procedure
title: Treat and inoculate prepared paddy-straw mushroom compost
description: Historical indoor thermal-treatment sequence with operational prerequisites retained.
status: draft
sources:
- id: nrcm-paddy2007
  title: O. P. Ahlawat and R. P. Tewari — Cultivation Technology of Paddy Straw Mushroom, NRCM (ICAR),
    2007
  resource: https://dmrsolan.res.in/Bull_PSM.pdf
steelthumb:
  ontology_version: '0.2'
  license: MIT
  claims:
  - id: bed
    kind: recommendation
    statement: Spread prepared compost 5–10 cm thick on shelves, using the thinner end in summer and thicker
      beds in winter; level lightly.
    applicability:
      conditions: Historical indoor compost method for cultivated Volvariella volvacea; prepared paddy-straw
        compost branch, not raw straw bundles or cotton-waste treatment.
    evidence:
    - source_id: nrcm-paddy2007
      relation: supports
      locator: Printed p. 22, Bedding and Pasteurization
    quantity:
      property: compost_layer_depth
      unit: cm
      min: 5
      max: 10
      basis: Season-dependent indoor shelf bed, not outdoor bundle height.
  - id: steam
    kind: recommendation
    statement: After 8–12 hours on the shelves, introduce steam; the bulletin specifies 65 °C for six
      hours for paddy-straw compost.
    applicability:
      conditions: Historical indoor compost method for cultivated Volvariella volvacea; prepared paddy-straw
        compost branch, not raw straw bundles or cotton-waste treatment.
    evidence:
    - source_id: nrcm-paddy2007
      relation: supports
      locator: Printed p. 22, Bedding and Pasteurization
    quantity:
      property: paddy_straw_pasteurization_temperature
      unit: degC
      value: 65
      basis: Six-hour treatment; source does not specify probe placement or hold-start criterion.
  - id: condition
    kind: recommendation
    statement: After steaming, keep the room closed at 50 °C for 24–36 hours, then let the substrate cool
      naturally.
    applicability:
      conditions: Historical indoor compost method for cultivated Volvariella volvacea; prepared paddy-straw
        compost branch, not raw straw bundles or cotton-waste treatment.
    evidence:
    - source_id: nrcm-paddy2007
      relation: supports
      locator: Printed p. 22, Bedding and Pasteurization
    quantity:
      property: poststeam_conditioning_temperature
      unit: degC
      value: 50
      basis: Historical indoor conditioning stage; duration retained in statement.
  - id: cool
    kind: recommendation
    statement: Inoculate when the compost reaches about 35 °C.
    applicability:
      conditions: Historical indoor compost method for cultivated Volvariella volvacea; prepared paddy-straw
        compost branch, not raw straw bundles or cotton-waste treatment.
    evidence:
    - source_id: nrcm-paddy2007
      relation: supports
      locator: Printed p. 22, end of Bedding and Pasteurization
    quantity:
      property: compost_temperature_at_spawning
      unit: degC
      value: 35
      basis: Approximate compost temperature, distinct from later room control.
  - id: dose
    kind: recommendation
    statement: Use fresh spawn at 1.4% of compost dry weight, or the separately stated 0.4% of wet weight.
    applicability:
      conditions: Historical indoor compost method for cultivated Volvariella volvacea; prepared paddy-straw
        compost branch, not raw straw bundles or cotton-waste treatment.
    evidence:
    - source_id: nrcm-paddy2007
      relation: supports
      locator: Printed p. 22, Spawning
    quantity:
      property: spawn_rate_dry_basis
      unit: percent
      value: 1.4
      basis: Spawn mass relative to compost dry mass; wet-basis alternative is not additive.
  - id: insert
    kind: recommendation
    statement: Insert spawn pieces 2–2.5 cm deep, spaced 12–15 cm apart; replace displaced compost and
      cover the bed with thin plastic.
    applicability:
      conditions: Historical indoor compost method for cultivated Volvariella volvacea; prepared paddy-straw
        compost branch, not raw straw bundles or cotton-waste treatment.
    evidence:
    - source_id: nrcm-paddy2007
      relation: supports
      locator: Printed pp. 22–23, Spawning, text continued beneath Figure 20
    quantity:
      property: spawn_insertion_depth
      unit: cm
      min: 2
      max: 2.5
      basis: Indoor compost method; lateral spacing retained in statement.
  relations:
  - predicate: applies_to
    target: /crops/paddy-straw-mushroom.md
---

# Treat and inoculate prepared paddy-straw mushroom compost

This task starts with prepared paddy-straw compost for [Volvariella volvacea](../crops/paddy-straw-mushroom.md). It does not turn unprocessed straw directly into a ready bed. Obtain a complete compost formulation and preparation specification first; the earlier bulletin section's lime identity and bran percentage basis need clarification before a reproducible recipe can be issued.

## Preconditions

Use labeled fresh spawn, measured compost mass and moisture basis, shelving or a treatment tunnel, and an established steam-equipment operating procedure. Define temperature-probe placement, treatment uniformity and when the holding clock begins with the equipment/process provider before use. The source gives thermal settings without those validation details; a room-air reading alone is not demonstrated to establish treatment throughout the compost. This is a partial operational reference until those decisions are resolved.

## Load, treat and cool

<a id="bed"></a>
Spread prepared compost 5–10 cm thick on shelves, using the thinner end in summer and thicker beds in winter; level lightly.[^nrcm-paddy2007]

<a id="steam"></a>
After 8–12 hours on the shelves, introduce steam; the bulletin specifies 65 °C for six hours for paddy-straw compost.[^nrcm-paddy2007]

<a id="condition"></a>
After steaming, keep the room closed at 50 °C for 24–36 hours, then let the substrate cool naturally.[^nrcm-paddy2007]

<a id="cool"></a>
Inoculate when the compost reaches about 35 °C.[^nrcm-paddy2007]

Keep the substrate branch fixed: the bulletin gives a different heat/time pair for cotton waste. Do not substitute that treatment or combine it with these paddy-straw settings. These are pasteurization/conditioning directions, not proof of sterilization. Record measured temperatures, timing, bed depth and departures from the selected process.

## Inoculate and continue

<a id="dose"></a>
Use fresh spawn at 1.4% of compost dry weight, or the separately stated 0.4% of wet weight.[^nrcm-paddy2007]

<a id="insert"></a>
Insert spawn pieces 2–2.5 cm deep, spaced 12–15 cm apart; replace displaced compost and cover the bed with thin plastic.[^nrcm-paddy2007]

Select one mass basis and document it. The two stated percentages are alternatives; they are not equivalent for every moisture content. Obtain the compost dry-mass value or the method's moisture specification before calculating a batch amount. Do not count dry straw before composting as measured dry compost without a justified basis.

Use the [indoor planning guide](../guides/paddy-straw-mushroom-indoor-planning.md) for the same source method's subsequent room conditions and its warning about watering primordia. Record colonization and abnormal growth; missing or uneven growth calls for review of treatment, cooling, spawn and moisture records, not an automatic repeat chemical application. Contamination response, exact ventilation/light controls and current local process confirmation remain unresolved. The [harvest task](harvest-paddy-straw-mushroom.md) supplies the later physical picking action. [Source notes](../sources/paddy-straw-mushroom-research.md).


[^nrcm-paddy2007]: [O. P. Ahlawat and R. P. Tewari — Cultivation Technology of Paddy Straw Mushroom, NRCM (ICAR), 2007](https://dmrsolan.res.in/Bull_PSM.pdf).
