---
type: Procedure
title: Thresh and hull a small bucket-rice harvest
description: JA manual threshing and pestle-based hull removal with processing limits.
status: draft
sources:
- id: ja-bucket-processing
  title: JA Group — 脱穀、もみすり、精米の方法 (threshing, hull removal and polishing)
  resource: https://life.ja-group.jp/education/bucket/column/advice08
steelthumb:
  ontology_version: '0.2'
  license: MIT
  claims:
  - id: thresh
    kind: recommendation
    statement: Clamp the base of a panicle between split chopsticks and pull the stem through to detach
      the grains.
    applicability:
      conditions: JA Japanese educational bucket-rice harvest, original Japanese HTML inspected 2026-09-28.
        Very small dried lots; equipment/material suitability and food-quality acceptance require separate
        assessment.
    evidence:
    - source_id: ja-bucket-processing
      relation: supports
      locator: 脱穀をしましょう — 2. 割りばしを使った方法
  - id: small-batch
    kind: recommendation
    statement: For manual hull removal, work a small pinch of paddy at a time against the inside of a
      suribachi grinding bowl.
    applicability:
      conditions: JA Japanese educational bucket-rice harvest, original Japanese HTML inspected 2026-09-28.
        Very small dried lots; equipment/material suitability and food-quality acceptance require separate
        assessment.
    evidence:
    - source_id: ja-bucket-processing
      relation: supports
      locator: もみすりをして玄米にしましょう — すり鉢を使った方法
  - id: pestle
    kind: recommendation
    statement: JA permits a surikogi pestle for hull removal, cautioning that excessive force breaks the
      rice.
    applicability:
      conditions: JA Japanese educational bucket-rice harvest, original Japanese HTML inspected 2026-09-28.
        Very small dried lots; equipment/material suitability and food-quality acceptance require separate
        assessment.
    evidence:
    - source_id: ja-bucket-processing
      relation: supports
      locator: Question about replacing the rubber baseball
  - id: bran
    kind: descriptive
    statement: JA distinguishes removing hulls to obtain brown rice from the subsequent removal of bran
      during polishing.
    applicability:
      conditions: JA Japanese educational bucket-rice harvest, original Japanese HTML inspected 2026-09-28.
        Very small dried lots; equipment/material suitability and food-quality acceptance require separate
        assessment.
    evidence:
    - source_id: ja-bucket-processing
      relation: supports
      locator: もみすりをして玄米にしましょう; 玄米を精米しましょう
  relations:
  - predicate: applies_to
    target: /systems/japanese-bucket-rice.md
---

# Thresh and hull a small bucket-rice harvest

## Purpose and prerequisites

Start with a labeled lot from the [harvest and drying task](harvest-japanese-bucket-rice.md). Confirm grain condition and readiness for processing separately; elapsed hanging time alone is not acceptance evidence. Prepare a clean receiving tray, split chopsticks, suribachi and surikogi suitable for food use. This route chooses the source’s pestle alternative; it does not require a sporting ball.

## Detach grain and remove hulls

<a id="thresh"></a>
Clamp the base of a panicle between split chopsticks and pull the stem through to detach the grains.[^ja-bucket-processing]

<a id="small-batch"></a>
For manual hull removal, work a small pinch of paddy at a time against the inside of a suribachi grinding bowl.[^ja-bucket-processing]

<a id="pestle"></a>
JA permits a surikogi pestle for hull removal, cautioning that excessive force breaks the rice.[^ja-bucket-processing]

Editorial setup: work over the tray to collect the detached paddy. Begin with a small portion, inspect hull removal and broken kernels, and adjust hand pressure from those observations. The source gives no force, speed, fixed repetition count or recovery guarantee. Separate loosened hulls and inspect the grain before treating the task as complete; an efficient winnowing/sieving method for this lot still needs evidence.

## Choose the intended grain product

<a id="bran"></a>
JA distinguishes removing hulls to obtain brown rice from the subsequent removal of bran during polishing.[^ja-bucket-processing]

Stopping after hull removal retains the brown-rice stage. This page does not prescribe a polishing duration or guarantee the appearance of commercial white rice. It also does not establish a storage life or cooking method.

## Record and follow up

Retain seed/lot identity, drying history, equipment, manual method, grain collected, remaining hulls and breakage. Persistent breakage requires review of both processing conditions and grain readiness rather than simply more force. Food-quality assessment, complete debris separation, storage and cooking remain open tasks.

[Bucket system](../systems/japanese-bucket-rice.md) · [Inspected source](../sources/japanese-bucket-rice-research.md).


[^ja-bucket-processing]: [JA Group — 脱穀、もみすり、精米の方法 (threshing, hull removal and polishing)](https://life.ja-group.jp/education/bucket/column/advice08).
