---
type: MeasurementMethod
title: Measure long-paddy moisture with Kett PM-450 Version 4501
description: Manufacturer-scoped loading and measurement workflow, without a storage-safety claim.
status: draft
sources:
- id: kett-pm450-4501
  title: Kett — PM-450 Version 4501 Operating Manual, document 060140-05; publication date unspecified
  resource: https://www.kett.co.jp/wp-content/uploads/2018/09/pm-450_4501_manual_e_060140-05_web.pdf
steelthumb:
  ontology_version: '0.2'
  license: MIT
  claims:
  - id: calibration
    kind: descriptive
    statement: Version 4501 lists long paddy as product 12, LPAD, with a 9–35% measurement range.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 18, Product List, row 12
    quantity:
      property: long_paddy_measurement_range
      unit: '%'
      min: 9
      max: 35
      basis: Instrument calibration range, not a storage target; moisture basis requires confirmation.
  - id: setup
    kind: recommendation
    statement: Set the meter level, away from strong wind and vibration.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 8, Preparation and Configuration
  - id: equilibrate
    kind: recommendation
    statement: Let the instrument equilibrate to ambient conditions for at least two hours before testing.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 8, Preparation and Configuration
    quantity:
      property: minimum_instrument_equilibration
      unit: hour
      value: 2
      basis: Instrument equilibration, not a prescribed time for every grain sample.
  - id: temperature
    kind: recommendation
    statement: Operate within 0–40°C.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 5, Specifications
    quantity:
      property: operating_temperature
      unit: °C
      min: 0
      max: 40
      basis: Meter operating conditions, not grain drying temperature.
  - id: fill
    kind: recommendation
    statement: Fill through the fitted funnel to one-third of its depth; remove it to level the hopper
      sample.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 10, How to extract a sample
    quantity:
      property: funnel_fill_fraction
      unit: fraction
      value: 0.3333333333333333
      basis: One-third of funnel depth after mounting on hopper; not one-third of sample-cup volume.
  - id: no-scoop
    kind: recommendation
    statement: Do not scoop grain directly with the manual hopper.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 10, Note
  - id: tare
    kind: recommendation
    statement: Empty the measuring section, press MEA, and keep the meter still during tare.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 11, Measurement step 1
  - id: pour
    kind: recommendation
    statement: At the sample-in signal, pour centrally and evenly over 5–6 seconds, leaving a level sample.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 11, Measurement step 2
    quantity:
      property: sample_loading_duration
      unit: second
      min: 5
      max: 6
      basis: Pouring interval after sample-in signal, not total test time.
  - id: empty
    kind: recommendation
    statement: At the sample-out signal, discharge the grain before repeating.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 13, Measurement step 4
  - id: questionable
    kind: recommendation
    statement: Stop using the meter and contact the manufacturer if readings are abnormal or questionable.
    applicability:
      conditions: Kett PM-450 Version 4501 with the listed long-paddy calibration. Confirm actual instrument
        version and grain identity; no transfer to short/medium-grain rice, other firmware, or another
        model is established.
    evidence:
    - source_id: kett-pm450-4501
      relation: supports
      locator: Printed page 17, Instructions for proper use, item 6
---

# Measure long-paddy moisture with Kett PM-450 Version 4501

## Select the applicable instrument and sample

This method is for an already available meter matching the documented version. It is not a product recommendation. Retain the model, version, calibration and grain-lot identity. Obtain the complete manufacturer manual for power, product selection, display icons, batteries, error messages and cleaning. Follow the [general grain sampling method](measure-grain-moisture.md) to define the sampling question before loading the meter.

<a id="calibration"></a>
Version 4501 lists long paddy as product 12, LPAD, with a 9–35% measurement range.[^kett-pm450-4501]

Match the physical grain and the instrument’s installed product list before selecting LPAD. Unidentified or short-grain rice does not acquire a valid calibration merely because it is paddy. Verify the moisture basis and reference comparison with the manufacturer or a qualified grain laboratory. This method does not reproduce or validate the ISO reference method listed by Kett.

## Prepare and measure

<a id="setup"></a>
Set the meter level, away from strong wind and vibration.[^kett-pm450-4501]

<a id="equilibrate"></a>
Let the instrument equilibrate to ambient conditions for at least two hours before testing.[^kett-pm450-4501]

<a id="temperature"></a>
Operate within 0–40°C.[^kett-pm450-4501]

<a id="fill"></a>
Fill through the fitted funnel to one-third of its depth; remove it to level the hopper sample.[^kett-pm450-4501]

<a id="no-scoop"></a>
Do not scoop grain directly with the manual hopper.[^kett-pm450-4501]

<a id="tare"></a>
Empty the measuring section, press MEA, and keep the meter still during tare.[^kett-pm450-4501]

<a id="pour"></a>
At the sample-in signal, pour centrally and evenly over 5–6 seconds, leaving a level sample.[^kett-pm450-4501]

<a id="empty"></a>
At the sample-out signal, discharge the grain before repeating.[^kett-pm450-4501]

Record each reading and its sample location before another measurement. Repeat with properly collected samples, retaining the raw values as well as any calculated mean. Sample selection and interpretation remain separate from how the meter is loaded. A mean must not conceal wet pockets when the question is whether drying is uniform.

## Resolve exceptions and retain the record

<a id="questionable"></a>
Stop using the meter and contact the manufacturer if readings are abnormal or questionable.[^kett-pm450-4501]

Treat a warning, out-of-range result, low-battery indication or failed tare as unresolved until handled according to the manual. Do not replace an error with the desired drying target. Retain sample and instrument temperatures, calibration identity, readings, warnings and any reference check. The brief steps here do not replace the full instrument instructions.

A displayed moisture percentage alone does not establish grain cleanliness, absence of toxins, seed viability or a storage duration. [Philippine paddy drying](../procedures/dry-rice-paddy-philippines.md) retains its own target-basis and storage-acceptance gaps. This meter’s suitability for each cultivar in the [lowland](../crops/lowland-rice.md) and [upland](../crops/upland-rice.md) collections remains to be confirmed. [Inspected manual](../sources/grain-moisture-instruments.md).


[^kett-pm450-4501]: [Kett — PM-450 Version 4501 Operating Manual, document 060140-05; publication date unspecified](https://www.kett.co.jp/wp-content/uploads/2018/09/pm-450_4501_manual_e_060140-05_web.pdf).
