---
type: MeasurementMethod
title: Measure liquid Brix with ATAGO PAL-3
description: Model-specific zero check, sample handling and reading workflow for a liquid sample.
status: draft
sources:
- id: atago-pal3-e17
  title: ATAGO — PAL-3 Cat. No. 3830 Instruction Manual, 3830-E17, print code 2106K; distributor-hosted
    original
  resource: https://www.merlegcenter.hu/custom/merlegcenteratmeneti/image/data/atago-digitalis-refraktometer-hasznalati-utmutato-PAL-3_3830.pdf
steelthumb:
  ontology_version: '0.2'
  license: MIT
  claims:
  - id: range
    kind: descriptive
    statement: The specified Brix range is 0–93%.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 1, Specifications
    quantity:
      property: brix_measurement_range
      unit: '% Brix'
      min: 0
      max: 93
      basis: Instrument display range, not a syrup endpoint.
  - id: ambient
    kind: recommendation
    statement: Operate at 10–40°C ambient temperature.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 1, Specifications
    quantity:
      property: ambient_operating_temperature
      unit: °C
      min: 10
      max: 40
      basis: Surrounding air; distinct from prism/sample temperature.
  - id: zero
    kind: recommendation
    statement: Before daily use and after battery replacement, clean the prism; apply about 0.3 mL tap
      water and let it equilibrate. Press START; if nonzero, press ZERO until its completion indication.
      Wipe dry.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 2, Zero-setting, caution and steps 1–4
    quantity:
      property: zero_check_water_volume
      unit: mL
      value: 0.3
      basis: Approximate volume in manufacturer zero-setting instructions; not dilution.
  - id: sample
    kind: recommendation
    statement: Apply at least 0.3 mL sample to the clean prism without metal tools; press START.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 1, Specifications sample volume; page 2, Measurement caution and steps
    quantity:
      property: minimum_sample_volume
      unit: mL
      value: 0.3
      basis: Specification minimum; measurement diagram says approximately 0.3 mL.
  - id: equilibrate
    kind: recommendation
    statement: For hot/cold samples, wait about 20 seconds before START, or repeat readings until stable.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 2, Measurement caution
    quantity:
      property: approximate_thermal_equilibration
      unit: second
      value: 20
      basis: Manufacturer approximate wait, not a guaranteed stability time.
  - id: temperature
    kind: descriptive
    statement: Displayed temperature is prism temperature, not necessarily sample temperature.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 2, Measurement caution
  - id: clean
    kind: recommendation
    statement: Wipe away sample, wash the stage with mild soap, rinse and dry; do not submerge the instrument.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 2, Cleaning
  - id: rinse
    kind: recommendation
    statement: Do not rinse the instrument with water above 50°C.
    applicability:
      conditions: ATAGO PAL-3 Cat. No. 3830, manual 3830-E17; instrument operation for a liquid sample.
        Not a validation of sorghum-syrup processing or another refractometer model.
    evidence:
    - source_id: atago-pal3-e17
      relation: supports
      locator: PDF page 1, Safety Instructions
    quantity:
      property: maximum_rinse_water_temperature
      unit: °C
      value: 50
      basis: Rinsing limit; not the analytical temperature-compensation range.
---

# Measure liquid Brix with ATAGO PAL-3

## Scope and equipment

Use the named instrument and its matching manual, tap water, a nonmetal sample applicator, tissues and mild soap. Check the actual model/revision before transferring these steps. This is an instrument workflow for an already obtained liquid sample; obtaining a representative syrup sample from processing equipment remains a separate task.

<a id="range"></a>
The specified Brix range is 0–93%.[^atago-pal3-e17]

<a id="ambient"></a>
Operate at 10–40°C ambient temperature.[^atago-pal3-e17]

## Zero check and reading

<a id="zero"></a>
Before daily use and after battery replacement, clean the prism; apply about 0.3 mL tap water and let it equilibrate. Press START; if nonzero, press ZERO until its completion indication. Wipe dry.[^atago-pal3-e17]

<a id="sample"></a>
Apply at least 0.3 mL sample to the clean prism without metal tools; press START.[^atago-pal3-e17]

<a id="equilibrate"></a>
For hot/cold samples, wait about 20 seconds before START, or repeat readings until stable.[^atago-pal3-e17]

<a id="temperature"></a>
Displayed temperature is prism temperature, not necessarily sample temperature.[^atago-pal3-e17]

Editorial recording plan: retain sample identity, crop/cultivar where known, batch, process stage, sampling time and location, any preparation or dilution, instrument identity, zero-check result, each reading and displayed prism temperature. If readings do not stabilize, retain them as unresolved and consult the matching manual/service guidance before making a processing decision. Do not invent a repeatability tolerance or average away unexplained drift. This page does not establish a dilution correction.

## Clean and finish

<a id="clean"></a>
Wipe away sample, wash the stage with mild soap, rinse and dry; do not submerge the instrument.[^atago-pal3-e17]

<a id="rinse"></a>
Do not rinse the instrument with water above 50°C.[^atago-pal3-e17]

## Interpretation and limits

The [sweet-sorghum endpoint guide](../guides/sweet-sorghum-syrup-endpoints.md) explains the conflicting process targets and distinguishes Brix, moisture, pH and water activity. Applying this instrument workflow to sorghum syrup is an editorial adaptation; the inspected manual is not a crop-specific validation. Its zero check is not evidence that a particular device is accurate across the syrup range. A traceable concentration-standard check, representative sample preparation and the complete food-processing/storage route still require evidence.

No cooking endpoint is selected by this method. No food-storage decision follows from a Brix reading alone. [Manual inspection notes](../sources/refractometer-research.md).


[^atago-pal3-e17]: [ATAGO — PAL-3 Cat. No. 3830 Instruction Manual, 3830-E17, print code 2106K; distributor-hosted original](https://www.merlegcenter.hu/custom/merlegcenteratmeneti/image/data/atago-digitalis-refraktometer-hasznalati-utmutato-PAL-3_3830.pdf).
