---
type: Guide
title: Compare sweet-sorghum syrup endpoints
description: Process-specific concentration targets and measurement boundaries for Kentucky and ICRISAT
  food-grade syrup.
status: draft
sources:
- id: bitzer-fox-agr123
  title: Morris J. Bitzer and Joe D. Fox — Processing Sweet Sorghum for Syrup, AGR-123, revised May 2000
  resource: https://publications.ca.uky.edu/sites/publications.ca.uky.edu/files/agr123.pdf
- id: icrisat-sweet90
  title: 'Ch Ravinder Reddy et al. — Sweet Sorghum Stalk Supply Chain Management: Decentralized Crushing-cum-Syrup
    Making Unit, Information Bulletin No. 90, 2012'
  resource: https://oar.icrisat.org/5926/1/SS_BulletinNo_30_2012.pdf
- id: ars-syrup2018
  title: USDA-ARS, principal investigator Karen Bett-Garber — High Value Markets for Sweet Sorghum Syrup,
    final report, August 2018
  resource: https://www.sorghumcheckoff.com/wp-content/uploads/2021/11/Eggleston_USDA_Sweet-Sorghum_Final_pdf.pdf
steelthumb:
  ontology_version: '0.2'
  license: MIT
  claims:
  - id: kentucky-endpoint
    kind: descriptive
    statement: AGR-123 specifies a finished-syrup reading of 78–80°Brix using a syrup hydrometer or sugar
      refractometer.
    applicability:
      conditions: Historical Kentucky evaporation guidance, revised May 2000; measurement temperature/correction
        is not specified in this passage.
    evidence:
    - source_id: bitzer-fox-agr123
      relation: supports
      locator: Printed page 5, Evaporation, paragraph beginning Remove the syrup
    quantity:
      property: reported_finished_syrup_brix
      unit: °Brix
      min: 78
      max: 80
      basis: AGR-123 evaporation endpoint; not a raw-stalk-juice harvest cue or a preservation validation.
  - id: icrisat-endpoint
    kind: descriptive
    statement: ICRISAT’s food-grade study stops heating at 72–76°Brix after vacuum clarification and slow
      evaporation.
    applicability:
      conditions: ICRISAT 2012 food-grade study within an Indian decentralized processing bulletin; not
        the surrounding ethanol-feedstock storage route.
    evidence:
    - source_id: icrisat-sweet90
      relation: supports
      locator: Printed page 22 (PDF page 34), v) Food grade syrup production and its use in food industry,
        Processing
    quantity:
      property: reported_finished_syrup_brix
      unit: °Brix
      min: 72
      max: 76
      basis: Reported food-grade study endpoint after its clarification process; not a universal cooking
        target.
  - id: separate-measurements
    kind: descriptive
    statement: The ICRISAT food-grade study measures soluble solids by digital refractometer, pH by pH
      meter and water activity with a separate instrument.
    applicability:
      conditions: Food-grade syrup study; distinct measured properties, not interchangeable readings.
    evidence:
    - source_id: icrisat-sweet90
      relation: supports
      locator: Printed page 22, Physico chemical characteristics
  - id: ars-method
    kind: descriptive
    statement: The USDA-ARS report defines Brix as dissolved refractometric solids and measures it with
      a temperature-controlled refractometer; moisture is measured separately by vacuum-oven mass loss.
    applicability:
      conditions: 2018 syrup characterization report; laboratory methods described, not a household instrument
        calibration protocol.
    evidence:
    - source_id: ars-syrup2018
      relation: supports
      locator: Page 3, Brix (% dissolved refractometric solids), and pH; Moisture
---

# Compare sweet-sorghum syrup endpoints

Use this guide when selecting the processing route for [sweet-sorghum stalks](../crops/sweet-sorghum.md). It compares published endpoints; it does not yet supply a complete home syrup recipe. Arrange the processing destination before [harvesting](../procedures/harvest-sweet-sorghum-stalks.md).

## Two process contexts

<a id="kentucky-endpoint"></a>
AGR-123 specifies a finished-syrup reading of 78–80°Brix using a syrup hydrometer or sugar refractometer.[^bitzer-fox-agr123]

<a id="icrisat-endpoint"></a>
ICRISAT’s food-grade study stops heating at 72–76°Brix after vacuum clarification and slow evaporation.[^icrisat-sweet90]

Editorial assessment: the ranges do not overlap. The inspected passages do not establish why, or demonstrate equivalence between the finished products. Keep each endpoint attached to its source process. Averaging them, or combining the clarification from one with the endpoint from the other, would create an untested recipe. Neither value is a raw-juice harvest threshold.

The ICRISAT bulletin primarily concerns a supply chain for ethanol feedstock. Its explicitly labeled food-grade section is the basis for the claim above; storage statements elsewhere in the bulletin have not been adopted as food-preservation instructions. The PDF filename differs from the bulletin number on its title page.

## What was measured

<a id="separate-measurements"></a>
The ICRISAT food-grade study measures soluble solids by digital refractometer, pH by pH meter and water activity with a separate instrument.[^icrisat-sweet90]

<a id="ars-method"></a>
The USDA-ARS report defines Brix as dissolved refractometric solids and measures it with a temperature-controlled refractometer; moisture is measured separately by vacuum-oven mass loss.[^ars-syrup2018]

A [PAL-3 instrument workflow](../methods/measure-brix-pal3.md) now documents one manual. For any other instrument, obtain its actual manual: supported sample and concentration range, calibration reference, sample preparation, temperature conditions or correction, cleaning and repeat-reading criteria. Record the instrument/model, calibration check, sample stage, temperature and raw readings. This is an editorial research/recording checklist, not a substitute for those missing instructions. The reported Brix readings alone are not a measured sugar composition, moisture result, pH result or water-activity result.

## Decisions still needed before processing

A complete route must connect accepted stalk material to extraction, food-contact equipment and cleaning, juice handling, clarification, evaporation and measurement, followed by a supported packaging and storage process. These inspected passages do not close that chain. Select current guidance for the intended equipment and food use before producing a stored product; no ambient shelf life or home-canning schedule is established here.

When a reading differs from the chosen process target, retain the sample stage and instrument conditions before diagnosing the syrup. Do not interpret raw juice, hot process liquid and a prepared measurement sample as interchangeable. Representative sampling, concentration-standard checks and the remaining processing steps are the next work; no successful batch or food-safety validation is claimed.

[Inspected sources and limitations](../sources/sweet-sorghum-research.md).


[^bitzer-fox-agr123]: [Morris J. Bitzer and Joe D. Fox — Processing Sweet Sorghum for Syrup, AGR-123, revised May 2000](https://publications.ca.uky.edu/sites/publications.ca.uky.edu/files/agr123.pdf).
[^icrisat-sweet90]: [Ch Ravinder Reddy et al. — Sweet Sorghum Stalk Supply Chain Management: Decentralized Crushing-cum-Syrup Making Unit, Information Bulletin No. 90, 2012](https://oar.icrisat.org/5926/1/SS_BulletinNo_30_2012.pdf).
[^ars-syrup2018]: [USDA-ARS, principal investigator Karen Bett-Garber — High Value Markets for Sweet Sorghum Syrup, final report, August 2018](https://www.sorghumcheckoff.com/wp-content/uploads/2021/11/Eggleston_USDA_Sweet-Sorghum_Final_pdf.pdf).
